Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Help with brewstand build!
Reply
 
Thread Tools
Old 03-14-2013, 03:50 AM   #1
raw22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Posts: 51
Liked 2 Times on 2 Posts
Likes Given: 1

Default Help with brewstand build!

Im building a brewstand and have very limited free time, being near the end of my masters program, I get a 10 day break starting friday, and would like to have my stand welded by then. Since I don't have the kab4 burners yet, I was wondering if someone could tell me the max dimensions for the burner, so that I can build my stand and just drop the burners in place when I get them. Just by guessing it looks like knobs with the thread in them on the side of the are about 1/2" making the total 11".
I am currently planning to leave a 13" x 13" hole for the burner to be mounted in. Is this a large enough space?


__________________
Brew stand build link http://www.homebrewtalk.com/f51/scra...-cheap-400372/
raw22 is offline
 
Reply With Quote
Old 03-14-2013, 02:27 PM   #2
maida7
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Asheville, NC
Posts: 2,827
Liked 47 Times on 40 Posts

Default

These are 11" across http://www.brewershardware.com/10-Lo...re-Burner.html

I'd assume these are the same as in the KAB4 and KAB6
maida7 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help me build my brewstand... sKafifer Equipment/Sanitation 3 06-06-2012 04:36 AM
Yet Another Brewstand build neumann Brew Stands 19 03-19-2012 09:50 PM
Brewstand Build November Brew Stands 5 03-11-2011 04:26 PM
Brewstand build centralpabrewer Equipment/Sanitation 5 12-28-2008 03:39 PM
My brewstand build tbulger Brew Stands 23 05-07-2008 04:48 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS