Keg connections - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Keg connections

Reply
 
Thread Tools
Old 03-02-2013, 07:26 PM   #1
Reepo
Recipes 
 
Feb 2013
Posts: 4


I have a dual tap Summit kegerator that came with sanke keg taps. I want to be able to disconnect the CO2 and beer lines from the sanke fitting and connect it to the ball lock threaded connectors and back and forth without cutting the lines. Anyone ever done this? Or am I just wasting my time? It appears the sanke fitting are British #10 according to a fitting distributor locally (Parker), which is close to 7/8"-14UNC, but not quite. The ball lock connectors are 7/16"-20UNC from what I can tell. At help would be appreciated. Thanks.

 
Reply With Quote
Old 03-02-2013, 09:34 PM   #2
Brewerforlife
 
Brewerforlife's Avatar
Recipes 
 
Dec 2009
Marquette, MICHIGAN
Posts: 250
Liked 9 Times on 8 Posts


You need the keg coupler conversion kit from FOXX equipment, pg. 194 of 2013 catalog. Located here- http://www.foxxequipment.com/pdf/FoxxCatalog2013.pdf

 
Reply With Quote
Old 03-02-2013, 10:46 PM   #3
Reepo
Recipes 
 
Feb 2013
Posts: 4

Thanks. I'll check it out.

 
Reply With Quote
Old 03-02-2013, 10:50 PM   #4
Snagg30341
Recipes 
 
Jan 2013
Posts: 87
Liked 1 Times on 1 Posts


I have sanke and ordered quick connect kit from beverage factory. Just got then. Seems to work great. Was 15 bucks.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What connections do I need snccoulter Equipment/Sanitation 1 02-29-2012 02:05 AM
Brass connections jdlev General Beer Discussion 4 05-26-2011 02:56 PM
CPU fan to 12V DC charger connections Naked_Eskimo Chillers & Stir Plates 4 09-27-2010 07:45 PM
Regulator Connections hughes_brews Bottling/Kegging 2 01-16-2010 12:25 PM
Different Sanke connections (How many) COLObrewer Bottling/Kegging 1 09-02-2009 01:00 AM


Forum Jump