First AG - Questions and a KISS recipe - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > First AG - Questions and a KISS recipe

Reply
 
Thread Tools
Old 09-21-2007, 05:30 PM   #1
Rudeboy
Recipes 
 
Jul 2007
Edmonton, Alberta
Posts: 256
Liked 2 Times on 2 Posts



I’m only one O-Ring away from building my FlyGuy MLT. I had to go to three Home Depots and a Rona to get it all though. Still don’t have a round Gott type cooler. Can’t find one anywhere. Guess it’s not the season. Still you’d think they need them to pour over coaches heads around this time of year. I’m going to get a square one and hope all the fittings still fit.

Hope to brew this weekend. So here are my questions.

First recipe. I joined the EHG and we put in an order to Wyeast. I’ve got it coming in a few days but probably not for this weekend. (But I can’t wait.) My plan for the good yeast is for a Heavy, a Porter and a Stout. But for this weekend I was going to use some dry yeast I have and I wanted a really simple recipe.

My neighbour was over yesterday and he’s a BMC kind of guy. My Cream Ale was a little too challenging for him. Still with the Heavy, Porter, Stout on deck I reckon it wouldn’t be a bad idea to have a nice light lagery, session type Ale to have for my neighbour and for me to have with nachos and watch NFL.

Also I’d like to keep it simple for the first run through. I have a 25 Kilo sack of American two row. And can get some specialty malts. So any ideas on a real simple recipe.


My brew kettle is just the turkey fryer. So after I cool the wort I siphon out of it into my primary? I whirlpool first? Whirlpooling is just swirling around and letting the particulates collect in the middle bottom? Then I siphon from the side and leave a little in the bottom to get ride of the cold and hot break particulates?

Aeration. I don’t have any oxygen or anything. Can’t I just siphon high into the primary, like a rough pour and won’t that aerate it?

I’m sure I’l have more questions to come but those are all I can think of now.


Thanks

Rudeboy
__________________
Primary: Crystal Lager
Bottled Aging: English Barleywine '16
Kegged Aging:
Kegged Ready: Cream of Three Crops; Dry Stout; Session IPA
Bottled Ready: English Barleywine '12; English Barleywine '14; Wee Heavy; Westy XII


 
Reply With Quote
Old 09-21-2007, 05:37 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,201
Liked 1658 Times on 1071 Posts


American Blonde:

9lbs 2-row

or 8.5lbs 2-row + .5lbs of crystal 10L.
Mash at 152F, 60 min.

1oz of a moderate AA hop for 60 minutes (I used Fuggle, take your pick).

US-05 dry yeast.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 09-21-2007, 07:29 PM   #3
damntheman
Recipes 
 
Apr 2005
Ames, IA
Posts: 18

Quote:
Originally Posted by Rudeboy
Aeration. I donít have any oxygen or anything. Canít I just siphon high into the primary, like a rough pour and wonít that aerate it?
All I do is cool my wort in the kettle and then pour it into my primary fermenter (bucket) to aerate it. I make 6 gallons of wort so I can leave the last 1 gallon in the bottom of the kettle as I pour. This is where all the break material and hops are, so I just quit pouring when I start getting into that stuff. This has worked very well for me since moving to all-grain.

As far as a recipe goes, my first AG recipe was kind of an underhopped Brittish Pale Ale. Here's what I made for my first AG batch:

8 lbs Simpson's Golden Promise
.5 lbs Biscuit Malt
.5 lbs Crystal 40
1 oz Fuggles (4.5%AA) - 60 min
.5 oz Kent Goldings (5.5%AA) - 30 min
.5 oz Kent Goldings (5.5% AA) - 3 min
Wyeast American Ale II Yeast

Mash at 150 for 60 min

 
Reply With Quote
Old 09-21-2007, 07:43 PM   #4
abracadabra
 
abracadabra's Avatar
Recipes 
 
Dec 2006
Newnan, Georgia
Posts: 1,923
Liked 8 Times on 8 Posts


There are lots of coolers on the internet Target, Amazon.com just do a google search for 10 gallon cooler.

A word of advise: don't cheap out and buy a 5 gallon cooler.

In addition to letting your wort splash into the fermenter it wouldn't hurt to shake the daylights out of the fermenter too.
__________________
Do what you like!
Brew what you like!

 
Reply With Quote
Old 09-21-2007, 08:41 PM   #5
Rudeboy
Recipes 
 
Jul 2007
Edmonton, Alberta
Posts: 256
Liked 2 Times on 2 Posts


Quote:
Originally Posted by abracadabra
There are lots of coolers on the internet Target, Amazon.com just do a google search for 10 gallon cooler.

A word of advise: don't cheap out and buy a 5 gallon cooler.

In addition to letting your wort splash into the fermenter it wouldn't hurt to shake the daylights out of the fermenter too.
The problem with us up in Canada is we get killed on the shipping. Same deal with online brewing supplies.

The local Wal-Mart is blowing Colman 48 Quart chest coolers for $9.95. It's not the top of the line. Actually it's the bottom of the line. So it won't retain heat as well as the silver sided 5-day coolers that you can re-enter the atmosphere in but it should do. Actually I like it better because the drain plug is a little higher and it doesn't have the little countersunk channel leading to it. I had been worried about fitting all the companents into that channel.

From the pictures I've seen here it seems 50/50 on round or chest coolers for MLT's. I think people say that chest coolers lose a little more heat but are easier to work with. (Still I think it's only like around a degree an hour) Also if you get a round false bottom you need a round one.

Everyone is in agreement not to get a 5 gallon cooler.


Rudeboy
__________________
Primary: Crystal Lager
Bottled Aging: English Barleywine '16
Kegged Aging:
Kegged Ready: Cream of Three Crops; Dry Stout; Session IPA
Bottled Ready: English Barleywine '12; English Barleywine '14; Wee Heavy; Westy XII

 
Reply With Quote
Old 09-21-2007, 09:40 PM   #6
ChrisS
I like cold beverages
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Apr 2007
Harrisburg, PA
Posts: 227
Liked 2 Times on 2 Posts


since you get 1:1 on your money nowadays you might consider crossing the border and seeing if anyone state side has a 10g cooler.

just a thought.

after looking at google maps... Edmonton isn't exactly "down the road" from the border... now if you lived in Vancouver or maybe Winnipeg...


 
Reply With Quote
Old 09-21-2007, 09:49 PM   #7
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


I have a nice Kolsch recipe that's very simple on the grain bill. Add like 2.5 more pounds of 2-row in place of the DME to make it AG.
I've received a bit of praise for this beer...its definitely the best one I brewed on my return (but every beer has been progressively better, this was number 4, first partial mash)

Kolsch #1
--------------------------------------------------------------------------

General
--------------------------------------------------------------------------
Category: Light Hybrid Beer
Subcategory: Kölsch
Recipe Type: Partial Mash
Batch Size: 5 gal.
Volume Boiled: 4.5 gal.
Mash Efficiency: 72 %
Total Grain/Extract: 7.50 lbs.
Total Hops: 2.1 oz.
Calories (12 fl. oz.): 182.5
Cost to Brew: $24.15 (USD)
Cost per Bottle (12 fl. oz.): $0.45 (USD)

Ingredients
--------------------------------------------------------------------------
4.00 lbs. English 2-row Pils
1 lbs. American Vienna
2.0 lbs. Dry Extra Light Extract
1 oz. Hallertau Hersbruck (Pellets, 4.50 %AA) boiled 60
minutes.
0.25 oz. Spalt Spalter (Pellets, 4.75 %AA) boiled 15 minutes.
0.25 oz. Saaz (Pellets, 5.00 %AA) boiled 15 minutes.
0.25 oz. Spalt Spalter (Pellets, 4.75 %AA) boiled 1 minutes.
0.25 oz. Saaz (Pellets, 5.00 %AA) boiled 1 minutes.
Yeast: WYeast 2565 Kolsch


Vital Statistics
--------------------------------------------------------------------------
Original Gravity: 1.046
Terminal Gravity: 1.009
Color: 3.45 SRM
Bitterness: 24.9 IBU
Alcohol (%volume): 4.9 %
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Old 09-22-2007, 03:39 AM   #8
Rudeboy
Recipes 
 
Jul 2007
Edmonton, Alberta
Posts: 256
Liked 2 Times on 2 Posts


Should I add some more base malt in case I don't hit 75% effeciency?

I always wondered about people's starting gravity. Don't you have to cool the wort to measure the OG? Also if you're high I guess you add water, if you have head space in the primary. But if you're low then what? Have some DME on stand by? Suck it up and try and do better next time?

Thanks

Rudeboy
__________________
Primary: Crystal Lager
Bottled Aging: English Barleywine '16
Kegged Aging:
Kegged Ready: Cream of Three Crops; Dry Stout; Session IPA
Bottled Ready: English Barleywine '12; English Barleywine '14; Wee Heavy; Westy XII

 
Reply With Quote
Old 09-22-2007, 04:52 AM   #9
Blender
 
Blender's Avatar
Recipes 
 
Jan 2006
Santa Cruz, CA.
Posts: 3,106
Liked 8 Times on 5 Posts


If you going to batch sparge a rectangular cooler is great. You can get more grain in there than the 5 gallon round cooler. I put a big thick towel on the lid of mine because that seems to be where the greatest heat loss occurs. I also make 5.5 gallon batches so at the end I get a good 5 gallons to bottle.
__________________
Gary

 
Reply With Quote
Old 09-22-2007, 01:43 PM   #10
somecallmetim
Recipes 
 
Jul 2007
Loudonville, OH.
Posts: 233
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Rudeboy
Suck it up and try and do better next time?


Rudeboy

Thats what I have done so far, my first two ag batches I've been getting about 60%, so I ended up with a brown porter instead of a robust one and a bitter instead of a pale ale. I suspect poor crush from the LHBS. I have a mill on the way...
__________________
On Tap - Haus Ale, Baltic Porter.
Fermenting- SNPA Clone, Half Wit

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Iraq can kiss my @$$ Retarded_Penguin_Brewing General Chit Chat 11 06-17-2009 08:23 PM
The only Blonde that i can Kiss... FishinDave07 Home Brewing Photo Forum 14 07-04-2008 02:51 AM
KISS Ale Soulive Recipes/Ingredients 3 05-07-2008 10:16 PM
Kiss Ipa buttugly Recipes/Ingredients 11 06-22-2006 10:49 PM


Forum Jump