Mash tun manifold design help - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Mash tun manifold design help

Reply
 
Thread Tools
Old 02-21-2013, 11:09 PM   #1
blefferd
Recipes 
 
Feb 2007
Jacksonville
Posts: 454
Liked 13 Times on 13 Posts



Need some help with my manifold design. This is what I have.

What parts get slots and what is a good spacing for it? Any help would be appreciated.

Attachment 102885
__________________
Автомат Калашникова Brewing Co.

Beer and Kalashnikov since 2007

 
Reply With Quote
Old 02-21-2013, 11:11 PM   #2
blefferd
Recipes 
 
Feb 2007
Jacksonville
Posts: 454
Liked 13 Times on 13 Posts


Sorry for the double post using my phone to post this!
__________________
Автомат Калашникова Brewing Co.

Beer and Kalashnikov since 2007

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mash tun manifold design blefferd Equipment/Sanitation 7 02-25-2013 11:36 PM
mash tun manifold design GrogNerd Kettles, Mash Tuns & Hot Liquor Tanks 18 01-17-2013 03:34 PM
DIY Mash/Lauter Cooler Tun - Manifold Design momobono Kettles, Mash Tuns & Hot Liquor Tanks 3 06-06-2012 09:01 PM
Mini mash tun manifold design Wooster Equipment/Sanitation 5 10-28-2010 04:32 PM
Which manifold design D*Bo Equipment/Sanitation 3 11-28-2007 05:31 AM


Forum Jump