What do you think of this as a hopstopper? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > What do you think of this as a hopstopper?

Reply
 
Thread Tools
Old 09-18-2007, 09:48 PM   #1
mr x
Recipes 
 
May 2007
Mainly Halifax
Posts: 1,576
Liked 4 Times on 4 Posts



http://www.leevalley.com/garden/page...t=2,2120,33279

I figure I can buy few bags and switch/rinse them as they become plugged up.
__________________
This place really went to hell. Follow the OF standard stout. Bye.

 
Reply With Quote
Old 09-19-2007, 02:11 PM   #2
abracadabra
 
abracadabra's Avatar
Recipes 
 
Dec 2006
Newnan, Georgia
Posts: 1,923
Liked 8 Times on 8 Posts


Looks like it'll work just fine.

Here's what I do. Walmart and Target, others too I imagine have stainless steel wire mess sink strainers $1.99 each. I got 2 of them and wired them together with a short piece of copper wire then put a long piece of copper wire 180* from the short piece. I use the long piece of wire to hang the homemade hop balls from the side of the boil pot. Then just pull them out when the boil is finished.
3 homemade hop balls would cost you $12 not counting the copper wire and would last virtually forever.
__________________
Do what you like!
Brew what you like!

 
Reply With Quote
Old 09-19-2007, 02:35 PM   #3
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,195
Liked 1654 Times on 1069 Posts


I'm not sure if you have Home Depot or Lowes, but I'm sure something similar. Go to the paint department and pickup a 5 gallon sized nylon paint strainer. It's like $3 and reusable.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 09-19-2007, 05:45 PM   #4
mr x
Recipes 
 
May 2007
Mainly Halifax
Posts: 1,576
Liked 4 Times on 4 Posts


I've got a 1 gallon strainer from HD that I may try to rig up as well. I can deal with the whole hops fine, but the pellet sludge takes a bit more refinement.
__________________
This place really went to hell. Follow the OF standard stout. Bye.

 
Reply With Quote
Old 09-19-2007, 05:49 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,195
Liked 1654 Times on 1069 Posts


That one gallon deal should stop pellet sludge also if it's the same one that I got from Lowes. Did it come in a two pack, kinda rounded on the bottom? I know the mesh is slightly more coarse than the "fine hop bags" available at LHBS, but I pull a baseball sized ball of hop particals out of the bag for even small 1oz additions.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 09-19-2007, 05:57 PM   #6
mr x
Recipes 
 
May 2007
Mainly Halifax
Posts: 1,576
Liked 4 Times on 4 Posts


It only came in a single pack, but it is rounded on the bottom. I picked up the jelly strainer to try as well - the mesh looks slightly finer. I'm going to try the jelly strainer first, and see how it does. The pellets plugged up my 8 inch round titanium screen fairly quick, so I like the idea of a system with quick bag changes in case of pluggage. I've seen the full 5 gallon set-up with the ready rod hangers, but I think I'll try this first.
__________________
This place really went to hell. Follow the OF standard stout. Bye.

 
Reply With Quote
Old 09-19-2007, 06:01 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,195
Liked 1654 Times on 1069 Posts


I built a 12" round hopstopper out of 60x40 stainless mesh and I too still like to contain my bittering/flavor hops in a bag.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Hopstopper Beerrific Equipment/Sanitation 22 03-22-2011 12:20 AM
hopstopper users... the_bird Equipment/Sanitation 101 01-23-2010 01:00 AM
DIY Hopstopper ScubaSteve DIY Projects 14 01-26-2009 03:34 AM
Braid instead of HopStopper? Cheesefood Equipment/Sanitation 11 03-11-2007 03:03 AM
Hopstopper davidkrau Equipment/Sanitation 5 04-24-2006 12:05 AM


Forum Jump