Honeywell controller box placement - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Automated Brewing Forum > Honeywell controller box placement
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 02-18-2013, 01:20 PM   #1
Brewn4life
Recipes 
 
Join Date: Jul 2011
Location: LosAngeles, Ca
Posts: 102
Liked 1 Times on 1 Posts


Ok I was wondering were other people placed the ignition box that comes with the gas valves on a Brutus set up?

https://customer.honeywell.com/en-US...d=Y8610U6006/U

Is it better to install these in the controller box mounted on the side of the stand or would it be better to mount under the stand next to the gas valves?
I'm feeling inclined to say in the box and if the wires aren't long enough cut and splice...



 
Reply With Quote
Old 02-24-2013, 04:56 PM   #2
Brewn4life
Recipes 
 
Join Date: Jul 2011
Location: LosAngeles, Ca
Posts: 102
Liked 1 Times on 1 Posts


Well I guess this was a bad question to ask since no one decided to answer. After looking at the wiring though I have decided running two wires instead of a **** load.



 
Reply With Quote
Old 02-24-2013, 05:04 PM   #3
de3isit
Recipes 
 
Join Date: Sep 2011
Location: Murrieta, CA
Posts: 263
Liked 17 Times on 16 Posts
Likes Given: 3


I have mine in my control panel. You will need a longer spark wire for the igniter though.
__________________
Monster Brewhouse
On Tap:
Hefe
Black IPA
Hop Shot IPA
Imperial Stout on Nitro

 
Reply With Quote
Old 02-26-2013, 01:21 PM   #4
Brewn4life
Recipes 
 
Join Date: Jul 2011
Location: LosAngeles, Ca
Posts: 102
Liked 1 Times on 1 Posts


That's what I was thinking of doing. It makes sense just it would mean 5 times the amount of wires coming out of the C.B. but I suppose wire shrink wrap would work good.
Thanks for the reply de3isit

 
Reply With Quote
Old 02-26-2013, 03:20 PM   #5
de3isit
Recipes 
 
Join Date: Sep 2011
Location: Murrieta, CA
Posts: 263
Liked 17 Times on 16 Posts
Likes Given: 3


The gas valve wires and the spark wires is it. The gas valve wires already come bundled together so you only have one bundle to each gas valve and the spark cord for each igniter. I used spiral cord organzer to keep everything orgainzed. You can see it in the pic.

Click image for larger version

Name:	IMAG0252.jpg
Views:	98
Size:	33.4 KB
ID:	103957
__________________
Monster Brewhouse
On Tap:
Hefe
Black IPA
Hop Shot IPA
Imperial Stout on Nitro

 
Reply With Quote
Old 02-27-2013, 02:03 PM   #6
Brewn4life
Recipes 
 
Join Date: Jul 2011
Location: LosAngeles, Ca
Posts: 102
Liked 1 Times on 1 Posts


Thanks for the pic. When your gas valve opens is it just a wide open on/off or can you program it(BCS or what have you) to adjust your flame?

 
Reply With Quote
Old 02-28-2013, 05:15 AM   #7
de3isit
Recipes 
 
Join Date: Sep 2011
Location: Murrieta, CA
Posts: 263
Liked 17 Times on 16 Posts
Likes Given: 3


The gas valves are open or closed only. To have one adjust you would need a modulating valve, which isn't very practical.


__________________
Monster Brewhouse
On Tap:
Hefe
Black IPA
Hop Shot IPA
Imperial Stout on Nitro

 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Temp controller issue, honeywell biggubba Brew Stands 0 01-12-2013 12:39 AM
Honeywell analog dual stage controller samc For Sale 0 10-27-2012 05:22 PM
Lp Gas, Honeywell Valves, & Auber PID/Temp Controller Questions jcav Brew Stands 2 05-01-2011 05:36 AM
Honeywell Temp Controller wiring MN_Jay Equipment/Sanitation 5 08-22-2010 03:05 PM


Forum Jump