Very New - Help With Ingredients - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Very New - Help With Ingredients

Reply
 
Thread Tools
Old 02-14-2013, 02:56 AM   #1
kevinstan
Recipes 
 
Oct 2012
Posts: 158
Liked 4 Times on 4 Posts



I have made my first one gallon batch of beer as a test and it turned out excellent. I was more than happy with the end result. It was a very simple very quick beer and I was pleased. I used only some Briess DME and Cascade hops. This was my very first attempt at beer. I have been making mead and wine for a while but have now started beer. My question is:

Since my recipe was very simple, I want to know what else I can do to add some more things to my beer. My LHBS has a beer section with a lot of jars of different beer things but I have never really looked at them or to see what it is. I want some suggestions of some other things that I can add during fermentation or cooking process that will add another step / flavor to my beer so I can keep experimenting. I know it is an endless testing thing but I want to start small and work my way up.

Anyone have any suggestions on something simple that I can do to add more to my simple homebrew ? Also, and explanation of how to add it, or the flavor it gives off would be great.

I thought about adding a few good squirts of honey to the next batch, or a handful of pecans, or ??? I don't want to alter the flavor completely, but just start figuring out how to add hints of other flavors. And what beer ingredients do what.

Thank you everyone in advance!



 
Reply With Quote
Old 02-14-2013, 03:00 AM   #2
freisste
Recipes 
 
Sep 2012
Ann Arbor, Michigan
Posts: 2,531
Liked 342 Times on 276 Posts


Steep grains before adding malt extract. Just put them in a muslin bag, drop into your pot, and heat the water to 160 or so. Temp is not particularly critical. This will add flavor and color along with a little complexity.



 
Reply With Quote
Old 02-14-2013, 03:05 AM   #3
KeyWestBrewing
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jan 2012
Key West, Florida
Posts: 6,014
Liked 713 Times on 557 Posts


I would look into steeping specialty grains. Caramel malts, Victory, Honey malt, etc.... They will add a bit more complexity than just using extract. You can also look into other hop varieties and yeast strains. Other than that there's fruit, herbs, spices, wood aging. A lot of options but its good to experiment with different malts and hops to see what else is out there without adding misc ingredients.
__________________
EAC - 5/2/14

Growing Hops in Key West, FL....

http://www.homebrewtalk.com/f92/casc...y-west-333466/

Primary : Mosiac/7Cs APA
Primary : Atocha Amber
Primary : Smoked Porter
On Tap : Cypress aged Chocolate Stout, Arnold Palmer Berliner Weisse, English Porter, Passionfruit Bavarian APA
On Deck : Jackfruit Hefeweizen, Pink Lemon Wit

*Member: The HBT Sweaty Fat Guys Cigar club

 
Reply With Quote
Old 02-14-2013, 03:06 AM   #4
ffaoe
Recipes 
 
Aug 2012
Moorestown, NJ
Posts: 461
Liked 79 Times on 55 Posts


i agree with freisste. steeping grains are one of the simplest ways to add a little more flavor. you could also use more than one type of hops and at different boil times.

 
Reply With Quote
Old 02-14-2013, 01:17 PM   #5
kevinstan
Recipes 
 
Oct 2012
Posts: 158
Liked 4 Times on 4 Posts


Looks like a trip to the LHBS for some grains. One last question. I see for most all grains it shows a percentage like 1 -10% or 20%. Can someone please explain this to me. Is that telling me how much to use ? I am making one gallon batches. How do I figure the 10 or 20% ?

 
Reply With Quote
Old 02-14-2013, 01:25 PM   #6
GilSwillBasementBrews
HBT_SUPPORTER.png
 
GilSwillBasementBrews's Avatar
Recipes 
 
Jul 2012
Eagleville, Pennsylvania
Posts: 2,618
Liked 250 Times on 205 Posts


That's the recommended max percentage to use in your grain bill.
IE 2-row 100% you could use just 2row if
You had a grain with 20% you'd only want to use it to make up a fifth of your recipe at most
Just for example.
2-row 4pounds
Munich malt 1 pound

If Munich was 20%. It was just an example not a factual statement on Munich malt.
__________________
Beer Plus Science = .....Good!!!!! By: Adam Savage

 
Reply With Quote
Old 02-14-2013, 01:48 PM   #7
KeyWestBrewing
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jan 2012
Key West, Florida
Posts: 6,014
Liked 713 Times on 557 Posts


Quote:
Originally Posted by GilSwillBasementBrews
That's the recommended max percentage to use in your grain bill.
IE 2-row 100% you could use just 2row if
You had a grain with 20% you'd only want to use it to make up a fifth of your recipe at most
Just for example.
2-row 4pounds
Munich malt 1 pound

If Munich was 20%. It was just an example not a factual statement on Munich malt.
This is correct. Though you can, you generally don't use the max proportion.
__________________
EAC - 5/2/14

Growing Hops in Key West, FL....

http://www.homebrewtalk.com/f92/casc...y-west-333466/

Primary : Mosiac/7Cs APA
Primary : Atocha Amber
Primary : Smoked Porter
On Tap : Cypress aged Chocolate Stout, Arnold Palmer Berliner Weisse, English Porter, Passionfruit Bavarian APA
On Deck : Jackfruit Hefeweizen, Pink Lemon Wit

*Member: The HBT Sweaty Fat Guys Cigar club

 
Reply With Quote
Old 02-14-2013, 02:50 PM   #8
kevinstan
Recipes 
 
Oct 2012
Posts: 158
Liked 4 Times on 4 Posts


Kindof makes sense but I am still a little confused. If I got a grain that said 1 to 10% and I wanted to do half and use 5% in a one gallon batch, how would I figure how much to use ? 5% would be 1/20th of the recipe, but how do I determine that figure ? If for one gallon of beer I use 4 cups of DME, then how much grain would I use ? I am confused on how to come up with the scale of grain based on the percentage.

 
Reply With Quote
Old 02-14-2013, 03:04 PM   #9
chickypad
lupulin shift victim
HBT_SUPPORTER.png
 
chickypad's Avatar
Recipes 
 
Jul 2010
SF Peninsula
Posts: 4,934
Liked 862 Times on 700 Posts


I'd suggest you check out some established recipes to either follow or modify. There is a database full of them here (you'll want to look for the ones marked extract), or there are many other places online or in books. Your LHBS can probably even help you out. Any recipe can be scaled to one gallon.

Unless you're just into the experimentation side and don't necessarily care if the ingredients go together, then ignore me. It just sounds like flying blind a bit. Like knowing nothing about cooking but going and trying random spices in your first soup. Might get something great, or might be yuck.

 
Reply With Quote
Old 02-14-2013, 03:21 PM   #10
ericbw
Recipes 
 
Dec 2012
Posts: 2,026
Liked 470 Times on 276 Posts


Quote:
Originally Posted by kevinstan
Kindof makes sense but I am still a little confused. If I got a grain that said 1 to 10% and I wanted to do half and use 5% in a one gallon batch, how would I figure how much to use ? 5% would be 1/20th of the recipe, but how do I determine that figure ? If for one gallon of beer I use 4 cups of DME, then how much grain would I use ? I am confused on how to come up with the scale of grain based on the percentage.
It's a little more complicated to figure it with extract, but for a gallon you can use a few ounces of grains. The lighter they are the more you can use. So maybe 4 ounces of caramel 10, but only 2 ounces of caramel 80. But only a half ounce of something really dark like black patent or roasted barley.

I think 4 oz of caramel 40 in a gallon batch with the extract is a good start on a pale ale.


__________________
www.thejewelofthemidwest.com

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What would you do with these ingredients? theWilly Beginners Beer Brewing Forum 11 05-25-2014 05:43 PM
My first ingredients? methusula110 Recipes/Ingredients 4 10-29-2012 11:31 PM
Help with some ingredients allenH Recipes/Ingredients 8 10-07-2012 12:33 AM
Help with getting some ingredients. HatchMo Extract Brewing 3 06-02-2012 09:19 PM
How Do You Buy Your Ingredients??? tdiowa General Beer Discussion 9 12-04-2007 04:18 PM


Forum Jump