MashMaster Mini Mill - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > MashMaster Mini Mill

Reply
 
Thread Tools
Old 02-13-2013, 12:18 PM   #1
scsjohn
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jul 2011
Chicago, IL
Posts: 135
Liked 2 Times on 2 Posts



I came across this mill while searching EVERY option for purchasing a grain mill.

http://www.mashmaster.com.au/p/45718...rain-mill.html

It's pricey and it looks like shipping to us is $90. Anyhow, after they subtract taxes (?), total is US $316.24.

Anyone have experience with a MashMaster mill?



 
Reply With Quote
Old 02-13-2013, 02:50 PM   #2
OMJ
Recipes 
 
May 2009
Camp Hill, PA
Posts: 580
Liked 19 Times on 13 Posts


Seems like everything on that site is over priced including the mill. Hell silicone tubing on there is $16 for 3 meters.



 
Reply With Quote
Old 02-13-2013, 08:57 PM   #3
scsjohn
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jul 2011
Chicago, IL
Posts: 135
Liked 2 Times on 2 Posts


Looks like it's in Australia. Also, I believe it has the VAT added in because when I started the checkout process, it removed a portion of the price (about $60 for taxes).

 
Reply With Quote
Old 02-14-2013, 03:46 AM   #4
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 16,855
Liked 2832 Times on 2121 Posts


Quote:
Originally Posted by OMJ View Post
Seems like everything on that site is over priced including the mill. Hell silicone tubing on there is $16 for 3 meters.
That would actually be a great price for 1/2" ID heavy wall (3/4" OD) silicone tubing. However, that site's price is per 1 meter - which would be like 150% higher than the going rate of ~$2/foot...

Cheers!

 
Reply With Quote
Old 02-14-2013, 04:33 AM   #5
OMJ
Recipes 
 
May 2009
Camp Hill, PA
Posts: 580
Liked 19 Times on 13 Posts


Yea I meant 3 feet.

 
Reply With Quote
Old 08-21-2014, 12:18 AM   #6
TheMadHopper
Recipes 
 
Mar 2013
Quito, Ecuador
Posts: 24
Liked 5 Times on 4 Posts


I know this thread is a little old but I figure at some point some one will be interested in an actual answer.

I've had a Mashmaster for about three months now and run a little nano brewery with it brewing twice a week with an average of 38kg per time. So far it has run fairly well for me, at one point one of the side space/gap knobs shook its self loose and caused a roller to drop to an awkward angle. It was an easy enough fix but I did have to take all the grain out of my hopper and then dissemble it.

However in my experience the a slightly annoying function of my mashmaster mill is that I have to get the mill started before I put any grain into the hopper otherwise it binds. It's really not much of a problem as long as you don't for get and it might even be the power of my motor or something like that.

Anyways, Ill give you guys an update in another 5 or six months.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grain mill: barley crusher, monster mill, etc TheWulf Want to Buy 0 01-16-2013 08:36 PM
DIY-ish CNC Mini Mill Yuri_Rage DIY Projects 93 10-28-2012 12:26 AM
Grain Mill - Is corona mill same as meat grinder? aeonderdonk Equipment/Sanitation 16 06-16-2012 02:51 AM
Monster Mill Grain Mill Stand Build Shay Equipment/Sanitation 12 12-24-2009 08:35 PM


Forum Jump