Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > My First Brewing Disaster.
Reply
 
Thread Tools
Old 02-12-2013, 02:58 PM   #1
kkotwas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 29
Likes Given: 19

Default My First Brewing Disaster.

New brewer hereÖ I just finished up my second brew day this Saturday. It was an Amber Ale, and everything went pretty smoothly. I got it in the fermenter, sealed it up, and BOOM another brew day in the books. My starting gravity ended up at 1.046, which was in the expected range. I woke up Sunday morning to happily find that fermentation had begun. The 3-piece airlock on my carboy was starting to bubble and a small bit of movement could be seen in the fermenter. By mid-day, fermentation began to get very active. By the end of the day, the krausen had risen to the top of the carboy and was starting to get in the airlock. Here is where things start to go downhill. Firstly, I should have realized that the krausen overflowing in to the airlock was a bad thing and put a blow-off tube on the carboy right then and there. I did not do that. I went to sleep Sunday night, simply content that I had obviously done something right being that the fermentation was so active. I woke up early Monday for work, and headed in to the spare bathroom where I keep my carboy. Can you guess what I saw when I walked in? Krausen & wort, EVERYWHERE. I mean it looked like someone shot Marvin in the face while he was in the middle of taking a dump in my toilet. Overnight the pressure had built up so much that the bung and airlock were forced out of the carboy and hit my ceiling so hard that it left a dent. But the mess was not my primary concern. I had eyes only for my beer. I quickly grabbed a backup airlock and tossed it in a bowl of sanitizer. I removed the old airlock (which was full of gunk) and tossed the bung in to the sanitizer as well. I then replaced the bung and new airlock to seal the carboy. At this point fermentation was still very active, and krausen was pouring out of the open fermenter. As soon as I replaced the airlock, it began to immediately bubble again. I would have taken the blow-off tube route right here and then, but I did not have the proper tubing to do so (remember, newbie here). So I headed off to work, praying that I didnít come home to yet another blowout. When I arrived home later that day, it seemed as though fermentation had stopped. It had obviously been going on during the day because the airlock was once again full of krausen and wort. But upon arriving home, it was no longer visibly fermenting and the krausen had dissipated. Now, with no fear of another blow out occurring, I sanitized the unused airlock and replaced the soiled one currently on the carboy. Although visible fermentation could no longer be seen, the airlock was still bubbling pretty regularly (maybe once every 5-10 seconds). My concern is thisÖ First, is it normal for the active primary fermentation period to be so intense and short (less than 2 days)? And second, although a solid coat of krausen is stuck to the walls of the carboy, there is barely any on the top surface of the wort. Is it a bad sign that almost all of krausen has dissipated this early in fermentation? On the first batch I did, after fermenting for two weeks there was still about an inch thick layer of krausen on the top of the wort before I racked it for bottling. Iím concerned I may have contaminated the wort during the time period the bung had been blown-off and I replaced it, or when switching the airlocks. Is it normal to have little to no krausen (after having a ton) this early in fermentation? Should I be worried, or and I just being paranoid?


kkotwas is offline
 
Reply With Quote
Old 02-12-2013, 03:22 PM   #2
willey146
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 27
Liked 2 Times on 2 Posts
Likes Given: 17

Default

with a active fermentation, contamination is not likly. relax! of course after you clean your mess! what size batch and what size carboy did you use? maybe a bigger one next time or use a bucket!


willey146 is offline
kkotwas Likes This 
Reply With Quote
Old 02-12-2013, 03:23 PM   #3
kkotwas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 29
Likes Given: 19

Default

5 Gallon batch, 6.5 Gallon carboy. I figured there was plenty of headspace, so I was pretty shocked by the blow-out.
kkotwas is offline
 
Reply With Quote
Old 02-12-2013, 03:25 PM   #4
kkotwas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 29
Likes Given: 19

Default

Also, as a secondary question... How the hell do I get this **** off the walls and ceiling?
kkotwas is offline
 
Reply With Quote
Old 02-12-2013, 03:45 PM   #5
jimmarshall
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Location: Oil City, Pennsylvania
Posts: 258
Liked 6 Times on 6 Posts
Likes Given: 1

Default

Quote:
Originally Posted by kkotwas View Post
Also, as a secondary question... How the hell do I get this **** off the walls and ceiling?
Leave it, adds character.
jimmarshall is offline
 
Reply With Quote
Old 02-12-2013, 03:52 PM   #6
kkotwas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 29
Likes Given: 19

Default

Quote:
Originally Posted by jimmarshall View Post
Leave it, adds character.
Ha. Not sure I want that sort of character in my guest bathroom. Kind of gives off an explosive-diarrhea paint job vibe. Not really the look I'm going for.
kkotwas is offline
 
Reply With Quote
Old 02-12-2013, 03:56 PM   #7
Homercidal
Licensed Sensual Massage Therapist.
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Homercidal's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Reed City, MI
Posts: 27,029
Liked 3494 Times on 2387 Posts
Likes Given: 2279

Default

Oxiclean.

And next time use a blow-off tube!
Homercidal is offline
 
Reply With Quote
Old 02-12-2013, 04:04 PM   #8
Xpertskir
Feedback Score: 7 reviews
Recipes 
 
Join Date: May 2012
Location: Morgantown, Wv
Posts: 2,195
Liked 440 Times on 283 Posts
Likes Given: 23

Default





Quote:
Originally Posted by Homercidal View Post
Oxiclean.

And next time use a blow-off tube!
This

Also would be a great time to talk the wife into a freezer for fermentation.

"Honey, if this happened in the ferm chamber we would only have it to clean"

Oh and RDWHAHB....your beer will be fine.
Xpertskir is offline
kkotwas Likes This 
Reply With Quote
Old 02-12-2013, 04:17 PM   #9
kkotwas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 29
Likes Given: 19

Default

Quote:
Originally Posted by Homercidal View Post
Oxiclean.

And next time use a blow-off tube!
Thanks.

And I most definitely will. Already bought the equipment.
kkotwas is offline
 
Reply With Quote
Old 02-12-2013, 05:14 PM   #10
jimmarshall
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Location: Oil City, Pennsylvania
Posts: 258
Liked 6 Times on 6 Posts
Likes Given: 1

Default

Plus one on the oxiclean, thats what I used over the weekend when I did the same thing.


jimmarshall is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another brewing disaster. TheGrindilow Beginners Beer Brewing Forum 3 05-29-2012 12:04 PM
First Brewing DISASTER - overcome! fall-line General Beer Discussion 26 06-02-2011 05:32 AM
First day brewing : disaster Erythro73 Beginners Beer Brewing Forum 27 01-12-2010 01:39 PM
Brewing disaster JonClayton Beginners Beer Brewing Forum 7 12-27-2009 03:22 AM
Brewing disaster MarkSheffield Recipes/Ingredients 21 07-15-2009 11:15 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS