Can't get beer to dispense from my kegs. - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Can't get beer to dispense from my kegs.

Reply
 
Thread Tools
Old 02-12-2013, 04:15 AM   #1
mfreck
Recipes 
 
Nov 2012
Posts: 4


I'm new to kegging and have two kegs ready to drink in my dual tap tower kegerator for the first time.

Unfortunately, when I open the faucet, nothing comes out of the keg and into the beer lines. When I release the pressure valve on the kegs, co2 purges out, so I know it's not the co2 in the kegs. Also, when I push down on each poppet, beer sprays out. I double checked, and the gas and out lines (ball lock) are connected on the correct sides.

My lines at 6' of Bevlex 200, my fridge is at about 35 degrees (just turned the temparture up to try to get it a little warmer) and I've tried at 12 psi and 20 psi.

I'm stumped, does anybody have any suggestions?



 
Reply With Quote
Old 02-12-2013, 04:22 AM   #2
tre9er
Recipes 
 
Jan 2012
Lincoln, NE
Posts: 4,369
Liked 242 Times on 197 Posts


Is your QD properly assembled, ie the pin and spring are in the connector? If beer sprays out when you depress the poppet yet not when you hook up the QD...then the liquid line must be the problem, in which case its likely the assembly of the QD or tap.


__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

 
Reply With Quote
Old 02-12-2013, 04:38 AM   #3
Hopper77
Recipes 
 
Jan 2013
Posts: 151
Liked 17 Times on 11 Posts


I had a bad tap. When I opened it all the way nothing would come out but when I opened it halfway I got beer. Try opening your tap slowly to see if its bad

 
Reply With Quote
Old 02-12-2013, 02:45 PM   #4
tre9er
Recipes 
 
Jan 2012
Lincoln, NE
Posts: 4,369
Liked 242 Times on 197 Posts


Yeah perhaps your taps are mis-assembled. The QD is pretty straightforward. If there is a pin inside that depresses with pressure from your finger, it's working properly. Does the line have any beer in it? Usually my liquid line fills up when I connect it. That would also suggest a bad tap or mis-assembled tap.
__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

 
Reply With Quote
Old 02-12-2013, 02:52 PM   #5
stratslinger
HBT_SUPPORTER.png
 
stratslinger's Avatar
Recipes 
 
Dec 2010
Terryville, CT
Posts: 2,436
Liked 203 Times on 169 Posts


I saw another one of these threads a few months back where a guy was brand new to kegging and simply didn't have his QD's seated all the way down on the liquid posts. Are you certain you have yours all the way down and locked in place? It can be an easy mistake to make - and I know I have at least one keg that's VERY difficult to get the liquid QD properly engaged on.

 
Reply With Quote
Old 02-12-2013, 02:58 PM   #6
Brewnoob1
Recipes 
 
Sep 2011
Puyallup, WA
Posts: 982
Liked 24 Times on 24 Posts


^^^Agree. Make sure it's seated all the way down. I've kegged a lot of brews and still sometimes don't seat the QD all the way down every now and again. Just double check everything. The parts of a kegging system aren't rocket science and should easily be figured out where the issue lies. Gas in, keg holding co2, beer out. It's either your QD or Tap
__________________
Keg #1: Empty :(
Keg #2: Empty :(
Kegs 3-5: Empty :(

Ferment #1: Empty :(
Ferment #2: Empty :(
Ferment #3: Empty :(

On Deck: Something....Anything!!!

 
Reply With Quote
Old 02-13-2013, 12:31 AM   #7
mfreck
Recipes 
 
Nov 2012
Posts: 4

Thanks for the responses,

Both the pin and springs are inside the QD. Also, I just tried to put all of my weight on the QD and twist it in, so I think it's down all of the way. Lastly, I opened the taps slowly, but still nothing.

Do you know how I would check to see if the taps are faulty? I've tightened everything by the taps too, so I'm still stumped.

 
Reply With Quote
Old 02-13-2013, 12:47 AM   #8
Hopper77
Recipes 
 
Jan 2013
Posts: 151
Liked 17 Times on 11 Posts


Is your fridge too cold? I've set mine too cold before and froze the beer

 
Reply With Quote
Old 02-13-2013, 02:16 AM   #9
mfreck
Recipes 
 
Nov 2012
Posts: 4

I don't think that's it. If I press in the poppet, beer sprays out.

Is there any chance that the liquid line on the keg has the wrong connect on the top of the keg? I know there is a long dip tube on the liquid line, but I have a feeling the connection on the keg is too long and may be a gas line.

Either that or it's the taps. I'm not sure how to approach fixing those.

 
Reply With Quote
Old 02-13-2013, 02:17 AM   #10
tre9er
Recipes 
 
Jan 2012
Lincoln, NE
Posts: 4,369
Liked 242 Times on 197 Posts


Quote:
Originally Posted by mfreck View Post
Thanks for the responses,

Both the pin and springs are inside the QD. Also, I just tried to put all of my weight on the QD and twist it in, so I think it's down all of the way. Lastly, I opened the taps slowly, but still nothing.

Do you know how I would check to see if the taps are faulty? I've tightened everything by the taps too, so I'm still stumped.
The qd clicks' right? You pull up the outer ring and snap it down untik it clicks on, right?


__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
can a soda bar gun dispense beer? jester5120 Equipment/Sanitation 8 10-30-2012 01:05 AM
Two Kegs - Carb On/Dispense Other Guidry Bottling/Kegging 1 03-15-2012 12:22 AM
wonderbar dispense beer? WaterWeasel Bottling/Kegging 9 11-03-2011 04:01 PM
Acquired Pepsi Kegs, good to dispense? kpr121 Bottling/Kegging 19 11-01-2011 08:09 PM
I now know why some of my kegs dispense cloudy beer BierMuncher Bottling/Kegging 7 04-15-2007 03:02 PM


Forum Jump