regulator question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > regulator question

Reply
 
Thread Tools
Old 02-09-2013, 06:53 PM   #1
Ctayl9jq
Recipes 
 
Dec 2011
Henrico, Va
Posts: 78



Quick question I have a setup for 4 kegs, 1 of which i have agreed to allow be soda. I know you have to regulate that to about 30 PSI, and I know i will need 20ish feet of tubing to slow the flow down.

Is the only thing I need to regulate the PSI this

http://sodadispenserdepot.com/pics/Reg5124.htm

Im thinking, the regulator hooked up to my CO2 tank running at 30, and then regulate that with the above secondary to 10ish for the rest of my beers which will go into a 3 way gas distributer. Is this correct?

 
Reply With Quote
Old 02-09-2013, 08:31 PM   #2
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 18,431
Liked 3247 Times on 2423 Posts


Yes, that will work and isn't an uncommon setup.

fwiw, an alternative is to simply add a second primary body to your existing regulator...

Cheers!

 
Reply With Quote
Old 02-09-2013, 08:45 PM   #3
Ctayl9jq
Recipes 
 
Dec 2011
Henrico, Va
Posts: 78


thanks!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
regulator question force33 Bottling/Kegging 1 01-11-2013 09:18 PM
Regulator question?? bratrules Bottling/Kegging 4 05-02-2012 01:21 AM
Regulator Question BrewVegas Bottling/Kegging 5 04-02-2011 03:22 PM
Regulator question SourHopHead Bottling/Kegging 2 07-03-2008 10:12 PM
regulator question h2dk Bottling/Kegging 12 02-25-2006 12:17 AM


Forum Jump