keg to conical fermenter - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > keg to conical fermenter

Thread Tools
Old 02-06-2013, 10:23 PM   #1
Sep 2011
tracy, ca
Posts: 30
Liked 1 Times on 1 Posts

hey guys i was thinking about turning my sanke into a conical.let me know if this sounds like a good way to do it.i want to drill a hole in the bottom of keg big enough to fit a 4 inch furrel have that welded on than use a 4 to 3 inch tri clamp adapter than use a 3 to 2 inch tri clamp extension and a 2 inch tri clamp with a 1 or 1/2 inch mpt fitting to fit a ball valve. for legs i would use 1 inch square tubing bolted to the skirts of the kegs. bolted for easy removal plus i want to put a heating pad on keg and it would be easier to put under legs so its up against the keg.if this sounds like a good way to do it or not let me know.thanks for all input. p.s. the keg was obtained legally before anyone asks.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Conical Fermenter zrule Equipment/Sanitation 4 12-16-2012 01:40 PM
WTB: Conical Fermenter Maltose For Sale 0 12-08-2010 06:38 PM
1/2 BBL Conical Fermenter? Niederhofer Equipment/Sanitation 12 09-02-2010 04:50 AM
Conical Fermenter..... How to use? Photopilot Equipment/Sanitation 13 03-24-2010 05:28 AM
SS Conical Fermenter TXANM Equipment/Sanitation 4 05-25-2009 11:31 PM

Forum Jump