Mash Lauter Tun from Coleman Xtreme 70 Quart Cooler - Page 6 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Mash Lauter Tun from Coleman Xtreme 70 Quart Cooler

Reply
 
Thread Tools
Old 02-21-2013, 02:24 AM   #51
lakedawgs
Recipes 
 
Feb 2011
Beech Grove, Indiana
Posts: 278
Liked 5 Times on 5 Posts


So, to be clear, folks that unhinge the lid are fly sparging and those of us that batch sparge leave the lid hinged?

 
Reply With Quote
Old 02-21-2013, 02:35 AM   #52
mrklueber
Recipes 
 
Oct 2012
Xenia, Ohio
Posts: 129
Liked 5 Times on 5 Posts


I have used this cooler with a copper pipe manifold for over a year and I fly sparge with the lid hinged. My average efficiency is around 75%. If the manifold is properly set up, then you won't get channeling. I think that is the whole point of a manifold, not just a drain hole at one end. Just my two cents worth.

 
Reply With Quote
Old 02-21-2013, 02:43 AM   #53
lakedawgs
Recipes 
 
Feb 2011
Beech Grove, Indiana
Posts: 278
Liked 5 Times on 5 Posts


I thought about going with a manifold but I decided on a stainless braid. Batch sparging I get a solid 80%+ on 1.065 beers and less. On beers in the 1.090 range I am getting 75%+.

 
Reply With Quote
Old 02-21-2013, 03:31 AM   #54
thadius856
HBT_LIFETIMESUPPORTER.png
 
thadius856's Avatar
Recipes 
 
Dec 2012
Marysville
Posts: 2,273
Liked 725 Times on 262 Posts


Quote:
Originally Posted by maida7 View Post
because the cooler is long and the drain is at one end. In theory you will have more flow at the end when the drain is and less or maybe no flow at the opposite end. So you rinse the crap out of the grain near the drain and the opposite end doesn't get rinsed at all. This the theory behind a false bottom or a pipe manifold. They encourage more even flow. The ideal mash tun for fly sparge is round, has a fairly deep grain bed, has a false bottom and has the drain in the center.
If you have a manifold, why does it even matter what shape it is? Once the wort enters the manifold, the distance it travels inside is a moot point.
__________________
Was this post helpful? Don't forget to click 'Like'!

Thadius Miller, Project Manager -> RaspberryPints

Before you build a keezer, look at this!
Chest Freezer Spec Sheets and Layout Drawings (15 models and counting)

 
Reply With Quote
Old 02-21-2013, 03:46 PM   #55
alien
Recipes 
 
Apr 2012
Philadelphia, PA
Posts: 1,235
Liked 68 Times on 59 Posts


Quote:
Originally Posted by thadius856 View Post
If you have a manifold, why does it even matter what shape it is? Once the wort enters the manifold, the distance it travels inside is a moot point.
From what I've read round coolers are better for fly sparging mainly because they are tall, so the grain bed is deeper, and because it is easier to install a false bottom.

With the good old sliding tee arrangement you could test whether it makes a any difference having the drain connected to the middle of the manifold or one end. It might make a tiny improvement. Fly sparging is a black art so who knows.

 
Reply With Quote
Old 02-21-2013, 03:48 PM   #56
maida7
Recipes 
 
Nov 2009
Asheville, NC
Posts: 2,827
Liked 48 Times on 41 Posts


Quote:
Originally Posted by mrklueber View Post
I have used this cooler with a copper pipe manifold for over a year and I fly sparge with the lid hinged. My average efficiency is around 75%. If the manifold is properly set up, then you won't get channeling. I think that is the whole point of a manifold, not just a drain hole at one end. Just my two cents worth.
COOL

 
Reply With Quote
Old 02-22-2013, 12:42 AM   #57
alien
Recipes 
 
Apr 2012
Philadelphia, PA
Posts: 1,235
Liked 68 Times on 59 Posts


I spaced the slots on the manifold every 1/2". Is there any downside to having the slots spaced more closely? I have heard that closer is better if you are recirculating, to improve flow rates.

Any thoughts on this? I have a fresh hacksaw blade but I need a little bit of motivation to go into a cold garage and cut a couple of hundred slots.

 
Reply With Quote
Old 02-22-2013, 02:47 AM   #58
thadius856
HBT_LIFETIMESUPPORTER.png
 
thadius856's Avatar
Recipes 
 
Dec 2012
Marysville
Posts: 2,273
Liked 725 Times on 262 Posts


Yeah for a fly sparging manifold, as long as you don't have slots right along the cooler walls I think you'll be fine.

Give it a try as-is. If your flow rate sucks, go back and add more.
__________________
Was this post helpful? Don't forget to click 'Like'!

Thadius Miller, Project Manager -> RaspberryPints

Before you build a keezer, look at this!
Chest Freezer Spec Sheets and Layout Drawings (15 models and counting)

 
Reply With Quote
Old 02-22-2013, 01:54 PM   #59
alien
Recipes 
 
Apr 2012
Philadelphia, PA
Posts: 1,235
Liked 68 Times on 59 Posts


What I wanted to hear.

 
Reply With Quote
Old 02-27-2013, 03:29 PM   #60
stewart194
Recipes 
 
Nov 2012
Lawrence, Kansas
Posts: 294
Liked 10 Times on 6 Posts


I purchased this cooler and ordered the hardware. This will be my first All Grain batch.

Do you guys pre-heat this cooler with hot water, then dump it out before mashing in? If so do you then heat your strike water to your desired mash temp? The recipe I'm trying first calls for a mash temp of 154. I'm wondering if I should pre-heat this cooler or if I should just heat the water to 164 or something like that and not pre-heat the cooler.

Also, this recipe has 12 pounds of grain. I'm going to keep doing 5 gallon batches for a while until I have my process dialed on this new system. It calls for a "mash thickness" of 1.5. I assume that is inches?? Do I need to worry about this? I'm batch sparging, and since this cooler is pretty large for 5 gallon batches, I don't know how I would go about this.

Thanks!!

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coleman Wheeled Xtreme 5 Cooler Mash Tun (with CPVC manifold) worstbrewing Equipment/Sanitation 8 09-17-2015 08:45 PM
Coleman 52 quart Xtreme Cooler sale Kirch3333 Kettles, Mash Tuns & Hot Liquor Tanks 11 07-21-2012 09:30 PM
Coleman 70-Quart Xtreme vs rubber made 10gal drink cooler. MLT Jcmccoy General Beer Discussion 6 09-21-2011 12:35 AM
70-Quart Coleman Xtreme Marine Manifold Mischief_Brewing Kettles, Mash Tuns & Hot Liquor Tanks 8 04-20-2011 03:53 PM
Sears.com - Coleman 52 Quart Xtreme $25 wrench001 For Sale 6 02-13-2010 05:27 AM


Forum Jump