Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Temp Caused By Fermentation....
Reply
 
Thread Tools
Old 02-03-2013, 02:47 PM   #1
Catfish1320
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Location: Scranton, Pennsylvania
Posts: 79
Liked 2 Times on 1 Posts
Likes Given: 1

Default Temp Caused By Fermentation....

Are the high temps caused by the fermentation itself ever taken into consideration? For instance, I have a beer fermenting in a room that has varied 65-67 however, shot with a heat gun, the Carboy is at 78*. It's in strong ferment mode 2nd day. But it's still temp. Just wondering if this is the norm or do I have to ferment at lower ambient temps?


Catfish1320 is offline
 
Reply With Quote
Old 02-03-2013, 02:54 PM   #2
zachattack
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: , MA
Posts: 2,654
Liked 267 Times on 229 Posts
Likes Given: 157

Default

Yes, most of us take that into account. You can get a cheap "fermometer" that will read the temperature on the carboy. And if you're using active temperature control, insulating the temp probe against the carboy is generally the best option.

What yeast are you using? A beer temp of 78 can produce some pretty nasty fusels. Also keep in mind that those IR thermometers can be fairly inaccurate, unless you input the specific emissivity of the surface.


zachattack is offline
 
Reply With Quote
Old 02-03-2013, 02:58 PM   #3
JLem
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Attleboro, MA
Posts: 3,653
Liked 176 Times on 153 Posts
Likes Given: 6

Default

Quote:
Originally Posted by Catfish1320 View Post
Are the high temps caused by the fermentation itself ever taken into consideration? For instance, I have a beer fermenting in a room that has varied 65-67 however, shot with a heat gun, the Carboy is at 78*. It's in strong ferment mode 2nd day. But it's still temp. Just wondering if this is the norm or do I have to ferment at lower ambient temps?
You need to account for this increase - all the temps listed for yeast and in recipes usually mean fermentation temp (i.e. the temperature of the beer) and not ambient temp. Still, an ambient temp of 65°F should be fine...an increase of 13°F seems high. Is your heat gun calibrated?
__________________
My Hombrewing Blog

My Beer Cellar
JLem is offline
 
Reply With Quote
Old 02-03-2013, 02:58 PM   #4
Pappers_
Moderator
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Pappers_'s Avatar
Recipes 
 
Join Date: Jan 2009
Location: Chicago
Posts: 12,784
Liked 1253 Times on 862 Posts
Likes Given: 2409

Default

Yes, the yeast in their activity create a lot of heat. I don't know anything about heat guns, so can't comment on how accurate that is. You could get a stick-on strip thermometer and attach it to the carboy and that will give you a sense of the temperature inside it. I use a temperature controller and a chest freezer, and attach the probe of the temperature controller to the carboy - I stick it snugly underneath the webbing of the carboy carrier I use, so its held tight against the glass. For most of the ale yeasts I use, I start the fermentation temps at 60F and raise it up slightly as fermentation continues.

Before my current setup, I used a big rubbermaid bin in my basement - ambient temps in the 60s - filled the bin with water and put the carboy in it, then swapped out 1/2 gallon frozen juice bottles. I kept a floating thermometer in the water and aimed for 58-64.
Pappers_ is offline
 
Reply With Quote
Old 02-03-2013, 03:39 PM   #5
Catfish1320
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Location: Scranton, Pennsylvania
Posts: 79
Liked 2 Times on 1 Posts
Likes Given: 1

Default

The yeast is wlp001. I was really surprised to see it that high also. I'm hoping the gun is just off. It's a good gun, but been around a while. Just in case, I moved it to another cooker area, and will be getting stick on thermometers real soon. Probably too late to worry about this one, but lesson learned.
Catfish1320 is offline
 
Reply With Quote
Old 02-03-2013, 03:44 PM   #6
beergolf
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
beergolf's Avatar
Recipes 
 
Join Date: Jan 2011
Location: collingswood, nj
Posts: 4,878
Liked 642 Times on 492 Posts
Likes Given: 258

Default

Yes yeast generates heat. From my experience if the ambient temp is near or below the low end of the recommended range for that yeast, the temp rise is usually only a few degrees. If the ambient is near or above the upper end of the temp range the temp rise can be 10 or even more degrees higher. I always like to start off at the lowers end of the temp range. The ferment is much easier to control that way.
beergolf is online now
 
Reply With Quote
Old 02-03-2013, 06:21 PM   #7
Wynne-R
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Texas
Posts: 957
Liked 119 Times on 77 Posts
Likes Given: 95

Default

140 kcal/kg extract

10 lbs of grain is 4.54 kg, x .85 =3.86 kg extract which would yield 540 kcal.

540 kcal would raise the temperature in 19L (5gal) 28.4 °C ( 51.1 °F)

So there is enough energy to heat 5 gallons by fifty degrees Fahrenheit. Which is to say if the reaction occurred in zero time, if it went off like a bomb, that’s what would happen.

I ferment in a water bath and in a well controlled fermentation the beer will be as much as 1.0 °F warmer than the water bath in the first few days. That’s measured with a calibrated thermometer in a thermowell. I don’t know what it would be in air, my guess is 10 times that.
Wynne-R is offline
 
Reply With Quote
Old 02-03-2013, 06:38 PM   #8
BigFloyd
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Location: Tyler, Texas
Posts: 5,163
Liked 722 Times on 629 Posts
Likes Given: 630

Default

Interestingly enough, I just made a first-hand observation of the heat generated by active fermentation. I put a thermometer on the rack to see what the air temp is inside my upright freezer where I have a 5-gallon batch of Northern English Brown that's been there about 19 hours. It's bubbling pretty steadily through the airlock.

I have the STC-1000 temp sensor taped to the side of the bucket and insulated so it gets a good reading to operate the controller.

Ambient air temp = 60*F

Side of bucket temp = 67*F
(which is the temp at which I have the controller set)

In all likelihood, the temperature in the center of the batch is running a few degrees hotter than on the side.

I doubt that it has peaked so soon. I rehydrated the Windsor, but didn't do any aeration other that letting wort run out of the ball valve and splash into the bucket. I'll check it later to see if the temp difference is any higher.



BigFloyd is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fermentation Temps - Room Temp vs: Internal Bucket Temp mccumath General Techniques 7 09-02-2013 06:15 AM
Fermenting temp: Fermentation chamber temp or sticket therm on carboy? cutchemist42 Fermentation & Yeast 1 10-03-2012 05:29 AM
Low FG - caused by high ferm temp? Billy-Ray Fermentation & Yeast 12 08-21-2012 05:09 AM
What caused a secondary fermentation? kanddr Beginners Beer Brewing Forum 11 06-16-2012 04:07 AM
carbonation calculator: fermentation temp, cold crash temp, bottling temp? jigidyjim Beginners Beer Brewing Forum 8 11-27-2010 01:04 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS