On the wall brewing - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > On the wall brewing

Reply
 
Thread Tools
Old 02-02-2013, 11:32 PM   #1
jay8s
Recipes 
 
May 2006
St. Louis MO
Posts: 76
Liked 1 Times on 1 Posts



I have been brewing for 4-5 years now, and the time has come to get a set up that is not hodge podged together. With my lack of good space in my garage, I am going to be building my three tier on the wall. There is a lot of prep work to do with this project. I will be keeping this as a log so I get it done...read my motivation is you... Any input/questions are welcome.
__________________
Yates' American Brewing Co.
Primary 1 - Air
Primary 2 - Air
Primary 3 - Patiently waiting

Secondary 1 - Air
Secondary 2 - Patiently waiting
Secondary 3 - Patiently waiting
On deck Chocolate Hazelnut Porter
Bottled - Tat Fire Fat Tire Clone, Sunset Paddle Wit, Stocking Feet Porter, Ed Worts House Pale Ale, Midwest Wit
Drinking - Sunset Paddle Wit,
Stocking Feet Porter, , Ed Worts House Pale Ale, Midwest Wit, Scottish Kilt+/-60
Kegged EF Clone

 
Reply With Quote
Old 02-02-2013, 11:47 PM   #2
NWAleDad
 
NWAleDad's Avatar
Recipes 
 
Feb 2011
Seattle, Wa
Posts: 323
Liked 16 Times on 13 Posts


plans or drawings? How will putting the stand on the wall reduce the space it will occupy?

 
Reply With Quote
Old 02-03-2013, 02:11 AM   #3
heckels
Recipes 
 
Jan 2011
Sioux Falls, SD
Posts: 815
Liked 65 Times on 51 Posts


Quote:
Originally Posted by NWAleDad
plans or drawings? How will putting the stand on the wall reduce the space it will occupy?
If a guy designs it right, you should be able to hinge each tier so that it folds (nearly) flat when not in use.

 
Reply With Quote
Old 02-05-2013, 02:12 AM   #4
jay8s
Recipes 
 
May 2006
St. Louis MO
Posts: 76
Liked 1 Times on 1 Posts


I have some drawings that I need to clean up some, but basically it will be two shelves mounted to the 2X4 wall studs. I will have Hot water on top, Mash tun in the middle, then boil pot on the floor. This will not be for my 10 gallon system, which I am getting rid of, but it will be for my 2-3 gallon system. This will basically make the brewery 6 feet tall, by 24 inches wide. I will have to do some work to deal with the heat from having a burner 4-5 feet off the floor, but out side of that it should be a nice compact little system. I will up the plans later tonight or tomorrow.
__________________
Yates' American Brewing Co.
Primary 1 - Air
Primary 2 - Air
Primary 3 - Patiently waiting

Secondary 1 - Air
Secondary 2 - Patiently waiting
Secondary 3 - Patiently waiting
On deck Chocolate Hazelnut Porter
Bottled - Tat Fire Fat Tire Clone, Sunset Paddle Wit, Stocking Feet Porter, Ed Worts House Pale Ale, Midwest Wit
Drinking - Sunset Paddle Wit,
Stocking Feet Porter, , Ed Worts House Pale Ale, Midwest Wit, Scottish Kilt+/-60
Kegged EF Clone

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
North Wall Brewing Electric Brewery Build SookeBrewing Brew Stands 44 08-27-2013 04:04 PM
hit the wall? Chia Drunken Ramblings and Mindless Mumbling 6 07-09-2012 08:14 PM
Thru-The-Wall fuzzyglasses Bottling/Kegging 3 05-19-2011 02:03 AM
Wall-E WillPall General Chit Chat 39 07-02-2008 01:09 PM
Up against the wall! david_42 Equipment/Sanitation 4 06-11-2006 11:24 PM


Forum Jump