Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Copper for thermowell
Reply
 
Thread Tools
Old 02-02-2013, 02:13 AM   #1
BetterSense
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Richardson, Texas
Posts: 981
Liked 46 Times on 36 Posts
Likes Given: 3

Default Copper for thermowell

I'm going to wrap a keg in heat tape and put it in my keezer so that i can ferment while serving.

I want to use a thermowell to control the beer temp. I have a coil of soft copper lying around. Is it ok to leave submerged for weeks? I suppose stainless is best but what is the practical disadvantage of copper?


BetterSense is offline
 
Reply With Quote
Old 02-02-2013, 02:30 AM   #2
afr0byte
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Vermont
Posts: 1,435
Liked 74 Times on 62 Posts
Likes Given: 49

Default

I believe I've heard that the lower pH of beer will start to leach the copper in to the beer. Too much copper can lead to copper poisoning. I wouldn't recommend it. Someone correct me if I'm wrong.


afr0byte is offline
 
Reply With Quote
Old 02-02-2013, 01:55 PM   #3
alien
Feedback Score: 1 reviews
Recipes 
 
Join Date: Apr 2012
Location: Philadelphia, PA
Posts: 1,235
Liked 65 Times on 58 Posts
Likes Given: 61

Default

+1 Copper exposure is not good in a ferment. SS or glass is OK. Measuring the outside of the vessel might be OK too.
alien is offline
 
Reply With Quote
Old 02-02-2013, 02:54 PM   #4
BetterSense
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Richardson, Texas
Posts: 981
Liked 46 Times on 36 Posts
Likes Given: 3

Default

I'm going to have heat tape wrapped around the outside so i cant really measure the outside temp. I just need a thermowell that i can dangle down one of the keg post holes. If i had a sensor that was for sure waterproof i could just hang the cord down into the beer.
BetterSense is offline
 
Reply With Quote
Old 02-02-2013, 05:34 PM   #5
cwi
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Austin
Posts: 845
Liked 32 Times on 28 Posts
Likes Given: 1

Default

Quote:
Originally Posted by BetterSense View Post
I'm going to have heat tape wrapped around the outside so i cant really measure the outside temp. I just need a thermowell that i can dangle down one of the keg post holes. If i had a sensor that was for sure waterproof i could just hang the cord down into the beer.
Taping to the outside, then insulating will work as long as the probe is a few inches away from the heat source, and a few inches below the liquid level. For your current situation, this should work as good as a thermowell. For traditional fermenting in a fridge/freezer (cooling or heating internal ambient), taping the probe to the outside and insulating actually works better than a thermowell.
cwi is offline
BetterSense Likes This 
Reply With Quote
Old 02-02-2013, 05:37 PM   #6
Gartywood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Windsor, CT
Posts: 306
Liked 10 Times on 10 Posts
Likes Given: 2

Default

Make sure that the heat tape is not of the self regulating type. The stuff for pipes usually is set to heat to a certain temp
Gartywood is offline
 
Reply With Quote
Old 02-02-2013, 06:37 PM   #7
BetterSense
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Richardson, Texas
Posts: 981
Liked 46 Times on 36 Posts
Likes Given: 3

Default

I'm going to use flexwatt heat tape which is the same as fermwrap. I guess i could put a strip of heat tape on one side of the corny and tape my sensor to the other side. If i insulate the whole thing it may work but i think the cool freezer air will affect it even under the insulation.
BetterSense is offline
 
Reply With Quote
Old 02-02-2013, 08:42 PM   #8
BetterSense
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Richardson, Texas
Posts: 981
Liked 46 Times on 36 Posts
Likes Given: 3

Default

It turns out i had an old racking cane that i never use since i got an auto-siphon. I was able to heat the end up with a torch and smoosh it shut. Plastic isn't very conductive but i think it will be enough for a fermenter thermowell.
BetterSense is offline
 
Reply With Quote
Old 02-02-2013, 11:23 PM   #9
cwi
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Austin
Posts: 845
Liked 32 Times on 28 Posts
Likes Given: 1

Default

Quote:
Originally Posted by BetterSense View Post
I'm going to use flexwatt heat tape which is the same as fermwrap. I guess i could put a strip of heat tape on one side of the corny and tape my sensor to the other side. If i insulate the whole thing it may work but i think the cool freezer air will affect it even under the insulation.
You would only want light insulation over the flex watt, and as much as you can manage over the probe. I assume you keezer is in the high 30's, so it will affect the sensor some, but not much and less the better you can insulate over the top of it.

Quote:
Originally Posted by BetterSense View Post
It turns out i had an old racking cane that i never use since i got an auto-siphon. I was able to heat the end up with a torch and smoosh it shut.
mmmmmm, BetterSense's Burnt Plastic Pale Ale. Include me out.
Seems like it would taste how Mardi Gras beads smell.
cwi is offline
 
Reply With Quote
Old 02-03-2013, 12:07 AM   #10
BetterSense
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Richardson, Texas
Posts: 981
Liked 46 Times on 36 Posts
Likes Given: 3

Default

I didnt burn the plastic just melt it. That's how they make buckets, racking canes, and better bottles in the first place...melting.


BetterSense is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stout TC Thermowell versus Stout Welded Thermowell oakbarn Equipment/Sanitation 5 08-07-2013 10:01 PM
Copper-Brazed plate chiller - does copper contact the wort? wantonsoup Equipment/Sanitation 4 04-17-2013 04:24 AM
Hood thermowell or stopper thermowell McMalty General Beer Discussion 4 12-29-2011 03:06 PM
Questions about copper poisoning/copper pipes + hoses in herms system kingoslo Equipment/Sanitation 32 08-24-2010 12:43 AM
Parts for copper thermowell? HomebrewJeff Kettles, Mash Tuns, & Hot Liquor Tanks 1 02-28-2009 02:54 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS