Thoughts on Filtering Wort - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > General Techniques > Thoughts on Filtering Wort

Thread Tools
Old 02-01-2013, 01:39 PM   #1
fish4fun's Avatar
Oct 2009
Posts: 38

I was making a 4L yeast starter from 1# of DME yesterday. After the hot break there was the usual "hot break trub" suspended in the resulting wort. I really hate the way the trub looks when suspended in the wort while it is on the stir plate, and that got me wondering....

When propagating yeast from a "new vial" (generation 0), I generally make 2 * 2L starters. I use 1 2L starter for the upcoming batch, and I "wash" the second for future use. With the 2L batch for future use, I leave the yeast on the stir plate for ~3 days, then move it to the fridge for a day or two. I then decant off ~1.2L of the beer, and return the flask to the stir plate for ~10min. I then fill six 4oz sterilized mason jars with the yeast slurry, label them and return them to the fridge. much of that slurry is really hot-break trub? I don't know the answer, but it gave me another reason to dislike it, so I thought I would be proactive about it. I took the 4L wort and filtered it into another flask first using a paper towel in a large funnel, and then again using a large coffee filter. The process was more than a bit messy, and required more than one paper towel and a couple of coffee filters, but the resulting wort was sparkling clear. Once done, I re-boiled the wort for another 15 minutes, and it remained beautifully clear. The final volume was 3.75L, meaning I "lost" about 250ml in my filtration process (~1/16th). I pitched my yeast happy in the knowledge that when all is done all of the trub will be yeast and fermentation byproducts.

Will this make a better starter? I really don't know. It sure **looks** better, lol, but that isn't hugely important; what it got me thinking about was the viability of filtering my wort in its travels from my boil kettle to my fermenter. I have a 25 gallon boil kettle and pass the wort through a cold plate on its way to my 27 gallon Blichmann "fermentators". I use the "Swirl" method in my Boil Kettle, but still get more hot/cold break & hop mess in my fermentor than I would like (Yes, I know the whole point of conicals is the ability to dump the trub, but dumping "costs beer" and tends to re-suspend some of the trub in the beer....) .

I have been thinking about adding a filter to the path from the boil kettle to the fermenter (most likely after the chill plate), but am hesitant for two reasons: 1) My experience with the 4L starter tells me that a large filter surface area is required because the particulates quickly clog the filtration media. 2) One more thing to clean/sanitize. A "sand" type filter like used in pools is fabulous for this type of filtering, but is a sanitation nightmare. A paper type filter like used in a SPA is easy to sanitize, but is highly prone to clogging. A "sediment" filter like used in domestic well filtration is fairly easy to sanitize and less prone to clogging than a paper type filter, but allows fairly large particles to pass, hence making it of questionable value.

At the end of all of this thinking, I am wondering if perhaps I am just thinking too much, LOL. Is the pursuit to clarify my beer going too far? I am not really looking for answers, just thinking this through and thought I would see what others thought.



Reply With Quote
Old 02-01-2013, 05:16 PM   #2
Feb 2010
Brooklyn, NY
Posts: 113
Liked 4 Times on 4 Posts

Personally, I think you might be going a little too far. Filtering post chilling seems like an unecessary sanitation risk no matter how you do it. I am also obsessive about having 'clear beer' but my concern is just in the final product, not in the primary. I am not really sure what you are going for with the starter process so i won't comment on that, seems overly complicated though.

One thought for the trub in the kettle/fermentor is you could use whole hops in your kettle as a filter. I use a false bottom in my boil kettle and with about 10 min left in the boil, I start recirculating the wort with a pump. The whole hops stick to the bottom of the false bottom and act as a filter as the wort continuously runs through it. I continue this as I chill and more cold break material forms and by the time I am down to pitching temp, the hops suck up most the break material and I run very clear beer into the fermentor.

You could also maybe add a diverter plate to your kettle to aid in your current 'swirl' method or a hopback could help too but you'll still likely have some trub. Just my thoughts, I'd be interested to hear the results if you try filtering pre-fermentation.

Reply With Quote
Old 02-02-2013, 10:32 PM   #3
1MadScientist's Avatar
Apr 2011
Panhandle of Florida, USA
Posts: 661
Liked 46 Times on 38 Posts

It looks like you are into the nice equipment, I would recommend the hopstopper. I was very happy when I had one. I also had a plate chiller. The pellet hops remained in the boil kettle and did not 'block' up my plate chiller.
In Cat Beers - I've Only Had One / Closed-system pressurized fermentation technique

Brewing with MS;

Reply With Quote
Old 02-03-2013, 06:39 AM   #4
helibrewer's Avatar
Nov 2011
Santa Rosa, CA
Posts: 3,820
Liked 327 Times on 276 Posts

I make my starters by heating the wort to 170-180 for 10 minutes, no boiling. I can chill it faster, there's no break, and it's just as sanitary.
Something is always fermenting....
"It's Bahl Hornin'"

Kegged: Bourbon Barrel Imperial Stout
On Deck: German Lager

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Filtering your wort H-Man General Beer Discussion 5 01-25-2013 07:19 PM
Filtering the wort. venquessa Beginners Beer Brewing Forum 2 05-27-2012 06:35 PM
your thoughts on filtering feelinhoppy General Beer Discussion 18 03-07-2012 04:49 PM
Filtering wort cdif911 Beginners Beer Brewing Forum 15 04-05-2010 12:05 AM
wort filtering? clemson55 General Techniques 7 12-30-2008 01:37 AM

Forum Jump