Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > Ferm chamber heater
Reply
 
Thread Tools
Old 01-31-2013, 01:40 PM   #1
lewisjt
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Posts: 21
Default Ferm chamber heater

I've finished my fermentation chamber and am in need of a heat source. I bought a cheap portable fan heater to plug into my STC-1000 on the heat outlet. The STC is working correctly, I've tested it with good success. My problem is that when I put the fan heater in the chamber and close the door, it doesn't always run when the door is closed and the STC has the heat light on. For instance I plugged it in and left it all night. This morning the temp is at 4* C. It should be somewhere close to 17... The fan runs fun when not inside the chamber.

Just want someone to tell me that it's the fan that is the issue, and that I should go buy a heat lamp. Also what would be the cheapest heat lamp/bulb that you know of?


lewisjt is offline
 
Reply With Quote
Old 01-31-2013, 01:50 PM   #2
LiquidFlame
HBT_LIFETIMESUPPORTER.png
Feedback Score: 8 reviews
 
LiquidFlame's Avatar
Recipes 
 
Join Date: Apr 2011
Location: Normal, IL
Posts: 554
Liked 32 Times on 24 Posts
Likes Given: 6

Default

Quote:
Originally Posted by lewisjt View Post
Also what would be the cheapest heat lamp/bulb that you know of?
http://www.wortomatic.com/articles/F...ion-Can-Heater, you can also use the heat belts that I use (you can see them in my Fermentation Chamber Build link in my signature)

Sounds like there is somthing either wrong with the wiring, your STC settings or does the heat fan have some kind of internal thermostat that is shutting it off?


__________________
Beer For Trade
Fermentation Chamber Build
Untappd: LiquidFlame
Instagram: LiquidFlame2600
LiquidFlame is offline
 
Reply With Quote
Old 01-31-2013, 01:58 PM   #3
OhCrap
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Galway
Posts: 623
Liked 50 Times on 35 Posts
Likes Given: 1

Default

I had a similar problem and it turned out the the heater auto switched off to prevent it over heating and burning out. Mine was a small heater in closet full of clothes
Buy a heat lamp!!! There someone told you
__________________
Beer
1 is good
2 is better
3 is enough &
4 ISN'T half enough
OhCrap is offline
sinisterkid Likes This 
Reply With Quote
Old 01-31-2013, 02:02 PM   #4
Donal
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Barnegat, NJ
Posts: 29
Liked 3 Times on 3 Posts
Likes Given: 1

Default

+1 on the paint can. I have one controlled by the STC1000 and it works awesome. the ferm box is out in my garage, temp is constant, happy brewer. I also have a small USB powered fan to circ the air
Donal is offline
 
Reply With Quote
Old 01-31-2013, 02:04 PM   #5
lewisjt
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Posts: 21
Default

...I'm an idiot. Looked at the box the fan heater came in and it clearly reads "Equipped with an internal heat limiting thermostat and overheat protection circuit..."

Question on the bulb in the paint can: Would it be able to warm up my chamber that is at or below freezing? I've got my chamber under my work bench in the garage, and its pretty cold out there currently.
lewisjt is offline
 
Reply With Quote
Old 01-31-2013, 02:05 PM   #6
lewisjt
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Posts: 21
Default

Thanks Donal - think we were posting at the same time.
lewisjt is offline
 
Reply With Quote
Old 01-31-2013, 02:08 PM   #7
AnOldUR
fer-men-TAY-shuhn
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
AnOldUR's Avatar
Recipes 
 
Join Date: Mar 2007
Location: New Jersey
Posts: 6,745
Liked 750 Times on 547 Posts
Likes Given: 591

Default

I found an old 6" x 12" heating pad with three temperature settings. Rolled it up and put it in a coffee cup in the corner of my chamber.
__________________
Sent from my POS computer because I refuse to own a smartphone!
AnOldUR is offline
 
Reply With Quote
Old 01-31-2013, 03:30 PM   #8
Imagineer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2012
Location: Aberdeen, SD
Posts: 28
Liked 5 Times on 3 Posts

Default

I have had great luck with a ceramic lamp for reptile cages. The best thing about them is they give of no light and just screw into a lampholder socket. Most pet stores carry them or they can easily be found on Ebay for a few dollars.
Imagineer is offline
 
Reply With Quote
Old 02-01-2013, 02:31 AM   #9
tsname
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Los Angeles, CA
Posts: 42
Liked 1 Times on 1 Posts
Likes Given: 1

Default

I was thinking the same thing about my ferm chamber, my dad suggested a heat lamp which we just used a 100W incandescent, works just fine. Haven't had any issues with my beer being light-struck since I use buckets.
tsname is offline
 
Reply With Quote
Old 02-01-2013, 03:38 AM   #10
doc5md
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Williamsport, Pa
Posts: 141
Liked 11 Times on 8 Posts
Likes Given: 8

Default

I use the 100W bulb in a paint can. I had everything already except the paint can. Very easy. working great!


doc5md is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ferm heater question ifearnothing0 Fermentation & Yeast 3 11-27-2012 01:50 PM
Increasing ferm temps with aquarium heater question flyingfinbar Fermentation & Yeast 9 04-27-2012 01:54 AM
Help me pick a ferm heater milldoggy Fermenters 4 10-17-2011 04:47 AM
Aquarium heater ferm temp control build/porn bsdx Equipment/Sanitation 2 05-29-2010 09:52 PM
Raising ferm temp with hot water heater? BrewDey General Techniques 3 01-12-2009 04:19 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS