Quick kegging question - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Quick kegging question

Reply
 
Thread Tools
Old 01-31-2013, 12:35 AM   #1
aarong
 
aarong's Avatar
Recipes 
 
Jan 2012
Newport, RI
Posts: 210
Liked 20 Times on 17 Posts



I cooled my keg to 40f and set the psi to 30. My plan was to keep it at 40f and at 30psi without shaking for 36 hours then lower the presure to serving.

My question is I set it at 30 psi and placed the co2 canister in the fridge the psi dropped to around 25 is that due to the temp change and I should keep it at that psi or should I adjust my psi back to 30 psi in the fridge?
__________________
Fermenting: Northern English Brown Ale
Keg: Saison
Bottle: empty
Vissani fermentor build

 
Reply With Quote
Old 01-31-2013, 12:39 AM   #2
tmurph6
Recipes 
 
Dec 2010
katy, tx
Posts: 404
Liked 28 Times on 15 Posts


The regulator should give the same psi tothe keg no matter the temp. More than likely you set to 30 and the regulator didnt have time to "stabilize" usually takes a minute or two in my experience.

 
Reply With Quote
Old 01-31-2013, 12:40 AM   #3
aarong
 
aarong's Avatar
Recipes 
 
Jan 2012
Newport, RI
Posts: 210
Liked 20 Times on 17 Posts


Sounds good ill ramp it up to 30 thanks!
__________________
Fermenting: Northern English Brown Ale
Keg: Saison
Bottle: empty
Vissani fermentor build

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
quick kegging question OHIOSTEVE Bottling/Kegging 1 04-10-2012 02:31 AM
Quick Kegging Question Thundercougarfalconbird Beginners Beer Brewing Forum 1 01-24-2011 03:08 PM
quick question on kegging JonClayton Bottling/Kegging 18 06-08-2010 07:07 PM
quick kegging question I_Keeps_It_Real Bottling/Kegging 2 09-23-2009 05:07 PM
Quick Kegging Question Jmarsh544 Bottling/Kegging 3 06-14-2009 03:19 AM


Forum Jump