Sculpture design advice, any good threads? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Sculpture design advice, any good threads?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-30-2013, 11:08 PM   #1
rpe290
Recipes 
 
Jan 2012
, SC
Posts: 118
Liked 7 Times on 7 Posts



Looking to make a sculpture of some kind, I am torn between a 3 tier and something like a MoreBeer 1550 2 tier with pump. I think I kind of like the simplicity of gravity feed, and I think I could design one of those that would store with a pretty small footprint (compared to a big box structure of 2 tier).

I don't really have limitations on fabrication -- I know where to buy plenty of stock, can get SS sheet pretty cheap, full knowledge and access to welders, manual machine shop and 3D modeling software.

I did plan on buying a pump eventually anyway, but not sure about 2...although if I had unlimited floor space I would likely thing a single tier sounds easy to use and make too...but that seems to be awful big.

Anyway, I am sure it has been talked about before, but the search is not so good IMO, and was curious if there are any good links to some kind of conversation like this, with pros and cons?

Thanks in advance...



 
Reply With Quote
Old 01-31-2013, 12:13 AM   #2
whatdyisit
Recipes 
 
May 2011
La Crescenta, California
Posts: 50
Liked 3 Times on 2 Posts


Here is a real nice 2 tier stand.
http://www.homebrewtalk.com/f51/my-rig-105047/
It's not any less floor space than a single tier but you can fly sparge with one one pump. Keep in mind you can batch sparge with one pump on a single tier also if you are trying to save money on a pump. I'm still working on my all-grain setup so I don't have any personal experience, but I can't imagine having to use ladders to brew. Seems incredibly inconvenient.


__________________
My homebrew story




Quote:
Originally Posted by mjdonnelly68 View Post
I think Pliny is the anal sex of beer.

 
Reply With Quote
Old 01-31-2013, 12:22 AM   #3
rpe290
Recipes 
 
Jan 2012
, SC
Posts: 118
Liked 7 Times on 7 Posts


Quote:
Originally Posted by whatdyisit View Post
Here is a real nice 2 tier stand.
http://www.homebrewtalk.com/f51/my-rig-105047/
It's not any less floor space than a single tier but you can fly sparge with one one pump. Keep in mind you can batch sparge with one pump on a single tier also if you are trying to save money on a pump. I'm still working on my all-grain setup so I don't have any personal experience, but I can't imagine having to use ladders to brew. Seems incredibly inconvenient.
That is an interesting design too, I really have only batch sparged--really don't have an attraction to fly sparge, since it seems like a lot more moving pieces and water levels...so I would likely batch sparge on any system I make regardless.

So I guess the other thing I'm thinking, since I have never used a pump, is that it seems to be another thing to figure out...maybe simplicity of gravity feed sounds better at the moment, but really isn't?

Forgot to mention in previous post, currently have a keggle, 10 gallon boil kettle (either one could be BK or HLT) and a 10 gallon igloo cooler MLT.

 
Reply With Quote
Old 01-31-2013, 12:23 AM   #4
Mojzis
Recipes 
 
Jan 2012
Rochester, NY
Posts: 1,253
Liked 146 Times on 104 Posts


What you could do is just troll through the DIY section and look for some high rated sculpture/brewery builds or the like.

 
Reply With Quote
Old 01-31-2013, 12:32 AM   #5
dcbc
Recipes 
 
Feb 2012
Tyler, TX
Posts: 324
Liked 24 Times on 21 Posts


If you have the space to store it and a pump, go single tier. It is so nice to have it all at working level. I had a folding three tier stand that was great for its ability to be stowed in a 22"x22" space, but I much prefer the ease of use of my single to. Pumps are much quicker than gravity, too. Finally, you can gravity feed into a bucket and transfer in the rare situation when your pump craps out on you. See my gallery in my signature to see the evolution of my stands. Good luck.
__________________
Brew Stands Gallery

 
Reply With Quote
Old 01-31-2013, 12:34 AM   #6
whatdyisit
Recipes 
 
May 2011
La Crescenta, California
Posts: 50
Liked 3 Times on 2 Posts


Quote:
Originally Posted by dcbc View Post
See my gallery in my signature to see the evolution of my stands. Good luck.
Broken link.
__________________
My homebrew story




Quote:
Originally Posted by mjdonnelly68 View Post
I think Pliny is the anal sex of beer.

 
Reply With Quote
Old 01-31-2013, 12:42 AM   #7
rpe290
Recipes 
 
Jan 2012
, SC
Posts: 118
Liked 7 Times on 7 Posts


Quote:
Originally Posted by whatdyisit View Post
Broken link.
Same here, but dcbc, i would really like to look, and thanks for the comparison of 3 tier/compact storage to single tier and a little bigger...I am going to have to set out to check on how I can store it and what makes sense.

I would definitely think a single tier USAGE is easier/better, but its the space, unfortunately I only have a 2 car garage and no outbuilding...

So I see 22" x 22" as a footprint # for a 3 tier, I assume a single tier would be more like 22" x 66" or so?

Will have to take a tape measure to the garage then...

 
Reply With Quote
Old 01-31-2013, 12:59 PM   #8
GoodDogShelby
Recipes 
 
Mar 2012
Erlanger, KY
Posts: 218
Liked 30 Times on 24 Posts


Take a look at this two tier design. I built one very similar. For my needs it stores better than a single tier, it only requires one pump, and it is easy to work with. I am very happy with it.

http://www.homebrewtalk.com/f51/2-ti...-build-327480/

 
Reply With Quote
Old 01-31-2013, 01:06 PM   #9
rpe290
Recipes 
 
Jan 2012
, SC
Posts: 118
Liked 7 Times on 7 Posts


Quote:
Originally Posted by GoodDogShelby View Post
Take a look at this two tier design. I built one very similar. For my needs it stores better than a single tier, it only requires one pump, and it is easy to work with. I am very happy with it.

http://www.homebrewtalk.com/f51/2-ti...-build-327480/
That is a different approach than I had seen before, thanks! Will have to see how I could hide that one...

 
Reply With Quote
Old 01-31-2013, 01:44 PM   #10
LiquidFlame
HBT_LIFETIMESUPPORTER.png
 
LiquidFlame's Avatar
Recipes 
 
Apr 2011
Normal, IL
Posts: 621
Liked 52 Times on 32 Posts


Go all electric and then you can build a single tier in your basement (if you have a basement). As for the searching, not sure what terms your using but if you type in "brew stand rig", you should be able to find a ton of posts. If that doesn't work go to google and just type in "site:homebrewtalk.com brew stand rig" you'll find ton of results.


__________________
Beer For Trade
Fermentation Chamber Build
Untappd: LiquidFlame
YouTube: BeerGeekGamer
Twitch: BeerGeekGamer
Instagram: BeerGeekGamer
Twitter: BeerGeekGamer

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brew Sculpture Plan (diagram) - Advice welcome and appreciated! ChiefHophead Brew Stands 5 08-21-2012 12:57 PM
wooden brew sculpture questions/inputs/advice bmbigda Brew Stands 3 07-28-2012 01:56 PM
Brainstorming my sculpture design. brewman ! Equipment/Sanitation 2 01-06-2012 05:34 PM
Advice on my planned sculpture jonalexdeval Equipment/Sanitation 5 09-18-2010 09:00 PM
Advice on my brew sculpture. yeastbound Brew Stands 25 07-21-2009 04:31 PM


Forum Jump