Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Electric Brewing > So who's worked in their main electrical panel?
Reply
 
Thread Tools
Old 02-03-2013, 07:37 PM   #21
Aaron1983
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Posts: 148
Liked 14 Times on 8 Posts
Likes Given: 8

Default

What I have done in the past when I needed line power shut off to the main panel is call the utility company. For a fee they will come out and pull the meter and come back after you have the work inspected (unless an inspection is not required).


__________________
Primary#1: Cloud 9 - Saison
Primary#2: Cloud 9 - Sweet Mead
Secondary#1: Nothing
Secondary#2: Nothing
Aging: Nothing
Coming Soon: A Kolch?
Aaron1983 is offline
 
Reply With Quote
Old 02-03-2013, 08:37 PM   #22
kal
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
kal's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Ottawa, Canada
Posts: 2,293
Liked 248 Times on 167 Posts
Likes Given: 6

Default

Everything's been answered but I thought I'd throw in my 2 cents:

Quote:
Originally Posted by Poobah58 View Post
If you have to ask those kinds of questions... GET AN ELECTRICIAN!!!
+1. If you have to ask, please don't go anywhere near your panel. While it's fairly straight forward work for many people and many don't have issues recommending someone do it, not everyone has the same knowledge or common sense about these things. So when someone asks the question that basically amounts to "should I do it" I would hope that everyone's answer would not "no".

Quote:
Originally Posted by cfrazier77 View Post
I have worked on my panel before. As long as you pull the mains you are good.
It's not just about working safely while the panel is open, it's making sure you actually wire things correctly so that you hopefully never have an issue after the power is back on too. Poorly done work in the electrical panel can cause issues the moment you turn the power back on, the next day, or 10 years down the road.

Quote:
Originally Posted by thadius856 View Post
Bad taping, loose and missing wire nuts, no lid on the junction box, cellulose insulation compacted into it, exceeded box fill, missing wire clamps and improper insulator choice (3x single conductor pole-ethylene high voltage wire instead of 3-wire NM).
A great example on how many things done incorrectly can lead to a fire: Loose/missing wire nuts can cause wires connections to loosen over time which causes resistance to build up because of charring, which in turn causes heat, and then because of wrong wire type and no cover and exceeding box fill, the heat heats up insulation in close proximity which catches fire.

It likely worked perfectly for years.

Same reason you shouldn't mess in your breaker panel if you have any doubts or have to ask any questions.

I myself have done work in the panels of all the houses I've own but I've always pulled permits and had it inspected. If you do any work, do the same. The cost of permitting is not expensive.

Quote:
Originally Posted by kevreh View Post
Makes you wonder if the money you spent on the pre-purchase inspection was worth it or not Not to keep you up at night, but I hope they didn't bury anything (open wiring) in the walls.
No home inspector does invasive inspection. It's only what they can see.

Kal


kal is offline
 
Reply With Quote
Old 02-04-2013, 12:16 AM   #23
Weezy
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Weezy's Avatar
Recipes 
 
Join Date: Jan 2013
Location: Pittsburgh, PA
Posts: 1,706
Liked 303 Times on 222 Posts
Likes Given: 195

Default

I'm very comfortable with working with electricity, but my comfort level stops at the panel. I'll second the recommendations to call someone. I just set up an appointment with an electrician. I need a 20A for a new pool...but it'll be convenient to discuss possibilities for a couple circuits for a brewery.
Weezy is offline
 
Reply With Quote
Old 02-04-2013, 12:58 AM   #24
dannylerch
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 120
Liked 6 Times on 6 Posts
Likes Given: 37

Default

I am an electrician in the film industry. We tie in to breaker boxes all the time. Remember, amps kill not voltage. Plug in power in this order. Green(Ground), White(Neutral), Red, Blue, Black. Always end the sequence with your hot legs. Make sure you don't have a knee on the ground, make sure you are wearing rubber soled shoes, make sure your feet aren't wet. ETC, basically you don't want your body to complete the circuit. If you have any doubts, hire a professional, preferably an electrician who is in a union. Because if they aren't union, they are probably a hack.
dannylerch is offline
 
Reply With Quote
Old 02-04-2013, 02:08 PM   #25
kevreh
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Annandale, VA
Posts: 244
Liked 12 Times on 10 Posts
Likes Given: 14

Default

Quote:
Originally Posted by kal View Post
....

I myself have done work in the panels of all the houses I've own but I've always pulled permits and had it inspected. If you do any work, do the same. The cost of permitting is not expensive.


Kal

Good point Kal. People unfairly view (county) inspectors as a nuisance, but they can provide a good (and relatively cheap) 2nd set of eyes to make sure things are done safely and correct. This applies to other things too (framing, plumbing).
__________________
On tap: Summer Ale, Vienna Lager/Ale
In the fermenter: 59 Minute IPA
On deck: Two Hearted IPA

My eBrewery
kevreh is offline
 
Reply With Quote
Old 02-04-2013, 02:18 PM   #26
kal
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
kal's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Ottawa, Canada
Posts: 2,293
Liked 248 Times on 167 Posts
Likes Given: 6

Default

It's not only about getting a second set of eyes either, it's about liability as well.

They sign off that the work which means if ever (god forbid) something was to happen and cause a fire or other issue that requires investigation, the insurance company will have less issues paying you because the work was inspected.

If an insurance company can prove that a fire was due to something done incorrectly that *YOU* did yourself and you did not pay for permiting or inspections, then they have cause to not pay out. I'm not saying they wouldn't, but it could get sticky.

So personal safety aside, is someone willing to gamble the value of their house to save a few bucks by not having their electrical work inspected?

Kal
kal is offline
Cookiebaggs Likes This 
Reply With Quote
Old 02-04-2013, 03:17 PM   #27
Oldskooler
Forum Supporter
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Oldskooler's Avatar
Recipes 
 
Join Date: Nov 2012
Location: Leesburg, FL
Posts: 293
Liked 34 Times on 28 Posts
Likes Given: 115

Default

I got this from a HBT thread:

Working with electricity is dangerous, you could die or be seriously injured by electricity! If you die you will not be able to brew or consume beer any longer.

Be safe
__________________
Enjoy Life..it has an expiration date
Oldskooler is offline
 
Reply With Quote
Old 02-04-2013, 08:48 PM   #28
crazyirishman34
HBT_LIFETIMESUPPORTER.png
Feedback Score: 68 reviews
 
crazyirishman34's Avatar
Recipes 
 
Join Date: Aug 2010
Location: Newton, MA
Posts: 1,710
Liked 79 Times on 70 Posts
Likes Given: 88

Default

One thing that I have to stress is don't remove your meter yourself. If you install it incorrectly it can explode.

http://www.electrical-contractor.net..._Explodes.html
crazyirishman34 is offline
 
Reply With Quote
Old 02-04-2013, 09:17 PM   #29
beaksnbeer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
beaksnbeer's Avatar
Recipes 
 
Join Date: May 2011
Location: New Port Richey, Florida
Posts: 2,831
Liked 494 Times on 328 Posts
Likes Given: 67

Default

I replaced my whole box when we purchased our house there were so many piggy-backs and jumpers the house failed the inspections. The condition that needed to be repaired "BEFORE" we could move in. Our electric company is a co-op so was only $50 to remove/install the meter, I removed and upgraded the box (pulled permits of course and had inspections) added $7500.00 to the value of the house.
__________________
Quote:
Home of the 12 Tap keezer
beaksnbeer is offline
 
Reply With Quote
Old 02-04-2013, 09:41 PM   #30
SpentGrains
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Livermore, CA
Posts: 249
Liked 40 Times on 34 Posts
Likes Given: 8

Default

Quote:
Originally Posted by aaron1983 View Post
what i have done in the past when i needed line power shut off to the main panel is call the utility company. For a fee they will come out and pull the meter and come back after you have the work inspected (unless an inspection is not required).
+10 pull the meter.


SpentGrains is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Main power wire gauge for 50A panel summerofgeorge Electric Brewing 17 06-14-2012 11:38 AM
What guage wire from main panel to spa panel? AdamCanFly Electric Brewing 22 02-01-2012 03:36 AM
Opinion on routing control panel electrical/sensor wires jcaudill Brew Stands 4 06-28-2011 11:33 AM
Control panel main power switch...what are you using? Ranger9913 Brew Stands 6 03-12-2010 05:20 PM
Electrical Help with Control Panel for Electric Kettle TheAleMaster Brew Stands 19 02-15-2010 03:42 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS