Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > STC-1000 Probe Question
Reply
 
Thread Tools
Old 01-28-2013, 06:19 PM   #1
Pash91
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Wherever Drinks Are
Posts: 202
Liked 1 Times on 1 Posts

Default STC-1000 Probe Question

I've done quite a bit of searching, but I can't seem to find an answer that satisfies my situation. I got an STC-1000 for my fermentation chamber. I've read about sticking it to the outside of a carboy, but I don't like that option. It just doesn't seem like it can effectively register the temperature. What's more, if I have carboys/fermenters of different materials, the correction factor should be different.

So, I was thinking of using a thermowell, but I won't be able to order one in time. My questions are thus:

1) I've read about people saying this should be submergible. Is it true that I can just sanitize it and drop it in the wort, then run the cable out the carboy cap?

2) I'm thinking of making a thermowell with some stainless I already have. I bought Silicone from HD a while back (http://www.homedepot.com/buy/ge-ii-w...e5000-24c.html) and was wondering if it would be safe to use as a sealant for the thermowell (I have a feeling, no).

3) Are there any other/better recommended methods of doing this in a pinch?


Pash91 is offline
 
Reply With Quote
Old 01-28-2013, 07:08 PM   #2
ChuckO
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
ChuckO's Avatar
Recipes 
 
Join Date: Oct 2008
Location: Keyrock, WV
Posts: 979
Liked 113 Times on 88 Posts
Likes Given: 14

Default

It works well to attach it to the outside of the fermenter covered by some bubble wrap or other insulation. The temperature gradient through the wall of the fermenter will be negligible as long as the probe is insulated from the air in the chamber.


ChuckO is offline
 
Reply With Quote
Old 01-28-2013, 07:24 PM   #3
Pash91
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Wherever Drinks Are
Posts: 202
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by ChuckO View Post
It works well to attach it to the outside of the fermenter covered by some bubble wrap or other insulation. The temperature gradient through the wall of the fermenter will be negligible as long as the probe is insulated from the air in the chamber.
I tested it with a glass of water, maybe that was too small a vessel to test with? I'd much rather do it with taping, so I'll give it a shot.

Thanks
Pash91 is offline
 
Reply With Quote
Old 01-28-2013, 07:30 PM   #4
b-boy
16%er
HBT_LIFETIMESUPPORTER.png
Feedback Score: 5 reviews
 
b-boy's Avatar
Recipes 
 
Join Date: Jun 2011
Location: The Frozen Tundra, NY
Posts: 3,717
Liked 924 Times on 629 Posts
Likes Given: 279

Default

Quote:
Originally Posted by Pash91 View Post
2) I'm thinking of making a thermowell with some stainless I already have. I bought Silicone from HD a while back (http://www.homedepot.com/buy/ge-ii-w...e5000-24c.html) and was wondering if it would be safe to use as a sealant for the thermowell (I have a feeling, no).
Can you solder it?
__________________
Never underestimate the potential of someone who refuses to act their age.
b-boy is online now
 
Reply With Quote
Old 01-28-2013, 07:35 PM   #5
Pash91
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Wherever Drinks Are
Posts: 202
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by b-boy View Post
Can you solder it?
I only have an electronics iron, not a torch. Was hoping to not buy anything else if possible
Pash91 is offline
 
Reply With Quote
Old 01-29-2013, 02:43 AM   #6
241
Feedback Score: 1 reviews
Recipes 
 
Join Date: Sep 2012
Location: San Diego, CA
Posts: 652
Liked 81 Times on 62 Posts
Likes Given: 206

Default

Maybe I'm not getting why you don't want to attach to the outside... but for me I go this route every time. I tested with water in my better bottle. Set ferm chamber to 64 over night with probe strapped to the carboy with a bungee cord and insulated with a small towel. Came back the next day, used a beer thief and actual water temp with my thermoworks thermometer was 64.2. Good enough for me at least, I'm pretty happy with my beer.
241 is offline
 
Reply With Quote
Old 01-29-2013, 02:44 AM   #7
Pash91
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Wherever Drinks Are
Posts: 202
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by 241 View Post
Maybe I'm not getting why you don't want to attach to the outside... but for me I go this route every time. I tested with water in my better bottle. Set ferm chamber to 64 over night with probe strapped to the carboy with a bungee cord and insulated with a small towel. Came back the next day, used a beer thief and actual water temp with my thermoworks thermometer was 64.2. Good enough for me at least, I'm pretty happy with my beer.
What I was getting at was that I'd go that route and maybe my test wasn't sufficient. If everyone else is doing it, that's good enough for me


Pash91 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Here's a question that's probably been asked about 1000 times BudzAndSudz Equipment/Sanitation 10 09-26-2012 12:08 AM
Has anyone tried putting a Ranco probe on a STC-1000 ebay temperature controller salombard79 Fermenters 3 06-10-2012 05:05 PM
Yeah, I know.... Another one... STC 1000 Question Snafu General Beer Discussion 26 03-25-2012 12:29 PM
STC 1000 temp probe Dellis0709 Fermenters 1 02-27-2012 12:37 AM
SCT-1000 relay question ImperialStout Fermenters 1 02-22-2012 09:53 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS