BIAB Equipment Considerations - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > BIAB Equipment Considerations
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-27-2013, 02:41 PM   #1
502Brews
Recipes 
 
Oct 2012
Louisville, KY
Posts: 7



Hello everyone.

I'm just making the move from partial mash brewing to BIAB and bought a new 62 qt Bayou Classic Stainless Steel pot to brew my batches in. I decided to go with the 62 qt so I could brew double batches in it. I've got a propane gas stand to cook on and plan to make a nylon voile bag for the grain. I also plan to install an eye hook and pulley to lift the grain out at mash out.
Having only done single batch, extract and partial mash brewing previously, I've relied on an ice bath to cool my wart. If I do a double batch is it reasonable to continue that practice or will it be difficult to cool the wort in a reasonable amount of time? Will I deifinately need a wort chiller? Seems like if I do that I would be well served to add a ball valve to the pot as well.

Thoughts, ideas and critiques are welcome.

Thanks in advance.
Ted



 
Reply With Quote
Old 01-27-2013, 03:19 PM   #2
zacster
Recipes 
 
Jan 2008
Brooklyn, NY
Posts: 1,112
Liked 32 Times on 28 Posts


You will definitely need a wort chiller. There are 2 reasons for that. First, an ice bath will take a very long time on 10 gallons of wort. You don't say whether you did full boils with the extract brews, but if you did you'd know how long 5 gallons takes, so more than double it.

Second and more importantly, how are you going to get 10 gallons of wort in a hot pot into the ice bath in the first place? That sucker's gonna be hot and heavy.

The ball valve will be very handy for the same reason. You need a way to move the liquid and gravity is the best way. Do you have a 10 gallon fermenter, or will you use 2 five gallon ones? I struggle to move a 5 gallon carboy myself, and 10 is way beyond my capacity. I've always had a feeling that doing >5 gallon batches requires a lot more equipment just because of the logistics. Manually moving things around starts to become a problem.



 
Reply With Quote
Old 01-27-2013, 03:50 PM   #3
inhousebrew
Recipes 
 
Aug 2012
minneapolis, minnesota
Posts: 1,461
Liked 127 Times on 114 Posts


A lot of people do ten gallon batches so I say go for it if you want. Wort chiller will definitely be needed though. It would take ages to get that down to pitching temp in a water bath. There are a lot of different ways to go so look into them, do some research and see what you think will work best for you.
__________________
I hate Walder Frey...

 
Reply With Quote
Old 01-27-2013, 04:01 PM   #4
slyk9
Recipes 
 
Jun 2012
Rocklin, CA
Posts: 13

Go for the chiller. Much easier than preparing an ice bath and then lifting a hot, heavy kettle and moving it without sloshing. I did it that way for a while but only with 2.5 gal BIAB batches. My immersion chiller makes life a lot easier, especially for larger batches.

 
Reply With Quote
Old 01-27-2013, 04:33 PM   #5
Supergus
Recipes 
 
Apr 2011
Canton, Illinois
Posts: 70
Liked 2 Times on 2 Posts


Look into no chill. I do that for 5 gallon batches, never had off flavors or any issues. Heck, I've even no chilled and pitched the yeast 10 days later due to time constraints.

 
Reply With Quote
Old 01-28-2013, 03:20 AM   #6
502Brews
Recipes 
 
Oct 2012
Louisville, KY
Posts: 7


Great feedback from everyone. My wife is around and helps on brew days but moving that much liquid is at best hazardous and I think some other means of cooling it down is going to be necessary.
I have to say, I think I will try the no chill method. I may buy a wort chiller but I've been I interested in trying no chill since I first saw it mentioned. Anyone have any input on sanitation and time spent in the danger zone for the formation of bacteria?

 
Reply With Quote
Old 01-29-2013, 03:52 AM   #7
Supergus
Recipes 
 
Apr 2011
Canton, Illinois
Posts: 70
Liked 2 Times on 2 Posts


No real threat on the no chill. You are putting boiling hot wort, so it will sanitize the container. (I still store it with star san when not in use)
I have even kept wort in there for a few days without issues. Recently I did a split batch, 1 with no chill, the other with my old immersion chiller, I didn't taste ANY difference.
Here is the cube I use, I got it at Walmart about a year ago.... http://www.campmor.com/reliance-7-ga...a-tainer.shtml

 
Reply With Quote
Old 01-29-2013, 06:46 AM   #8
dustinstriplin
HBT_SUPPORTER.png
Recipes 
 
Dec 2012
tacoma, wa
Posts: 52
Liked 3 Times on 3 Posts


How does a no chill method affect your aroma/flavor hop additions? I would think all the volatile oils would dissipate.
Do you use a glass carboy? Are you worried it will crack from the heat?

 
Reply With Quote
Old 01-30-2013, 01:14 PM   #9
Supergus
Recipes 
 
Apr 2011
Canton, Illinois
Posts: 70
Liked 2 Times on 2 Posts


Quote:
Originally Posted by dustinstriplin
How does a no chill method affect your aroma/flavor hop additions? I would think all the volatile oils would dissipate.
Do you use a glass carboy? Are you worried it will crack from the heat?
I use the container I linked earlier in the post. I don't put it in my fermentor until it it cooled, (I use a better bottle)
I really haven't noticed any real loss in aroma/flavor with the hop additions, but the most hoppy beer I brew is APAs. I do notice my hop flavors & aroma fades over time, but I figure that is just a normality that goes with hopier beers.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brew In A Bag (BIAB) Equipment Summary shiproute Equipment/Sanitation 12 11-27-2012 06:51 PM
BIAB equipment question msa8967 All Grain & Partial Mash Brewing 11 03-08-2012 10:40 PM
BIAB Equipment question - Turkey fryer Coloradobrewer Beginners Beer Brewing Forum 4 09-03-2011 04:45 AM
BIAB stove top equipment wheatbrewer Equipment/Sanitation 2 03-21-2011 07:04 AM
Will I be able to do 5g AG BIAB with my equipment Pivzavod All Grain & Partial Mash Brewing 3 06-20-2010 03:07 PM


Forum Jump