New bar, kegerator upgraded, fermentation box in the works... [big pics] - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > New bar, kegerator upgraded, fermentation box in the works... [big pics]

Reply
 
Thread Tools
Old 09-11-2007, 09:40 PM   #1
TheFlyingBeer
Recipes 
 
May 2007
Catonsville, MD
Posts: 409
Liked 19 Times on 16 Posts



This is going to amount to a rather large post, sorry but I have been very busy and would like to show off my new projects.

Firstly, I finally got around to upgrading my kegerator to support 3 taps - 1 commercial 1/2 barrel and 2 5gal cornies. In order to get gas to all three kegs I went ahead and built a tripple secondary regulator setup as shown below.


Before the build.


Completed gas system with two ball lock fittings and one sanke coupler fitting.

For now the gas system is sitting below the shelf in my fridge as you can see below. I plan on making a mounting bracket for the secondaries so they are easier to adjust and aren't just laying on the bottom of the fridge.


Inside of kegerator.


Outside of kegerator with two more taps added. I plan on making some custom tap handles when I get the time and funding.


__________________

Primaries: Air
Secondaries: Lakefront India Brown Ale

On Tap 1: Rootbeer, On Tap 2: NB White ouse Honey Ale, On Tap 3: Nitrogen, On Tap 4: Air, On Tap 5: Air
On Deck: DIPA, Imp Stout, Porter, Wheat, Black IPA

"No sense having empty carboys around when full ones take up just as much space. " - Me

 
Reply With Quote
Old 09-11-2007, 09:41 PM   #2
TheFlyingBeer
Recipes 
 
May 2007
Catonsville, MD
Posts: 409
Liked 19 Times on 16 Posts


Well the kegerator needed a new home in this new house so I built a bar around it with some scrap lumber we had sitting around. The first shot is of the bar wood and the second picture is of the bar nearly completed.


Just getting started.


Nearly finished, painted and trimmed... just need to decide how to finish the top surface.


Behind the bar with plenty of room for holding drinks and supplies.

I put the bar together over the better part of two days and it turned out really well for spending less than $30 on materials and paint. Finally after building the bar and kegerator up I had myself a double brew day on Sunday when it came to my attention that a fermentation chamber might be handy... so I got to work.


I am using 2" extruded foamboard insulation to build a box that can hold two different 5-6gal fermenters and keep each at a different temperature. There is a lot more work to be done on this eventually I might right up my plans and how it turns out.


Well that has to be the longest post I have ever made, if you are still reading all the way down here I am impressed. Any questions, ask away!


__________________

Primaries: Air
Secondaries: Lakefront India Brown Ale

On Tap 1: Rootbeer, On Tap 2: NB White ouse Honey Ale, On Tap 3: Nitrogen, On Tap 4: Air, On Tap 5: Air
On Deck: DIPA, Imp Stout, Porter, Wheat, Black IPA

"No sense having empty carboys around when full ones take up just as much space. " - Me

 
Reply With Quote
Old 09-11-2007, 11:18 PM   #3
TheJadedDog
AFK ATM
HBT_LIFETIMESUPPORTER.png
 
TheJadedDog's Avatar
Recipes 
 
Aug 2006
People's Republic of Cambridge
Posts: 3,316
Liked 16 Times on 13 Posts


That bar looks really nice, excellent job.
__________________
And now we go AG!

On Tap: Nadda
Primary: Nadda
Planning: Extra Special Bitter

 
Reply With Quote
Old 09-11-2007, 11:26 PM   #4
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
 
olllllo's Avatar
Recipes 
 
Apr 2006
Phoenix, Arizona
Posts: 13,330
Liked 139 Times on 113 Posts


Turning a CO2 cylinder on its side. Generally not a good idea.

Edit:
http://www.beveragefactory.com/draft.../___8505.shtml
Point 3

http://www.msds.org/oshanswers/chemi...g_cd.html#_1_7
__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter

 
Reply With Quote
Old 09-11-2007, 11:59 PM   #5
TheFlyingBeer
Recipes 
 
May 2007
Catonsville, MD
Posts: 409
Liked 19 Times on 16 Posts


Quote:
Originally Posted by olllllo
Tuning a CO2 cylinder on its side. Generally not a good idea.

Edit:
http://www.beveragefactory.com/draft.../___8505.shtml
Point 3
Thanks for that bit of advice, I was wondering but never really read into it. I have been planning on upgrading to a 10 or 20lb tank anyways and that would have to go on the outside, luckily I have enough space on the side of the fridge. I guess I should get those plans moving forward soon, I will just risk it for the next week or so as it has been going fine for about 8 days now.
__________________

Primaries: Air
Secondaries: Lakefront India Brown Ale

On Tap 1: Rootbeer, On Tap 2: NB White ouse Honey Ale, On Tap 3: Nitrogen, On Tap 4: Air, On Tap 5: Air
On Deck: DIPA, Imp Stout, Porter, Wheat, Black IPA

"No sense having empty carboys around when full ones take up just as much space. " - Me

 
Reply With Quote
Old 09-12-2007, 02:18 AM   #6
uuurang
Recipes 
 
Mar 2007
madison, wi
Posts: 298
Liked 2 Times on 2 Posts


[QUOTE=TheFlyingBeer]


Before the build.

Nice build! The housing looks like Perlick from http://www.sciplus.com/index.cfm I'm really curious were you got those gas valves from. They look like the ones northernbrewer sell on there gas manifolds. I wish I could find some place to get just the valves. Care to divulge your source? Also, I don't see any check valves. I've read they come in handy to protect the gauges from liquid intrusion. Something to think about.
__________________

"Labor is prior to, and independent of, capital. Capital is only the fruit of labor, and could never have existed if labor had not first existed. Labor is the superior of capital, and deserves much the higher consideration." Lincoln's First Annual Message to Congress, December 3, 1861.



 
Reply With Quote
Old 09-12-2007, 06:10 AM   #7
TheFlyingBeer
Recipes 
 
May 2007
Catonsville, MD
Posts: 409
Liked 19 Times on 16 Posts


Quote:
Originally Posted by uuurang
Nice build! The housing looks like Perlick from http://www.sciplus.com/index.cfm I'm really curious were you got those gas valves from. They look like the ones northernbrewer sell on there gas manifolds. I wish I could find some place to get just the valves. Care to divulge your source? Also, I don't see any check valves. I've read they come in handy to protect the gauges from liquid intrusion. Something to think about.
Those regulator bodies are the ones you mentioned and are working great. The gas valves are also the ones you see at Northern Brewer, they sell them separately from their manifolds. I ordered mine from www.kegkits.com due to their lower pricing but my order took 3 weeks and 4 phone calls to ship so I won't be doing business with them. The valves have built in checks so shouldn't have to worry about liquid back flow.
__________________

Primaries: Air
Secondaries: Lakefront India Brown Ale

On Tap 1: Rootbeer, On Tap 2: NB White ouse Honey Ale, On Tap 3: Nitrogen, On Tap 4: Air, On Tap 5: Air
On Deck: DIPA, Imp Stout, Porter, Wheat, Black IPA

"No sense having empty carboys around when full ones take up just as much space. " - Me

 
Reply With Quote
Old 09-13-2007, 02:36 AM   #8
uuurang
Recipes 
 
Mar 2007
madison, wi
Posts: 298
Liked 2 Times on 2 Posts


Thanks for the tip. Hadn't seen www.kegkits.com before. Sorry to here they suck for shipping. Looks like there valves are half what would be found elsewhere, but that doesn't do any good if they don't ship. And yes, I see now you had the check valve covered.

Edit: Damn, FWIW, just found another site with shut valves reasonable... http://www.micromatic.com/draft-keg-...t-cid-313.html Thx Cplhunter!
__________________

"Labor is prior to, and independent of, capital. Capital is only the fruit of labor, and could never have existed if labor had not first existed. Labor is the superior of capital, and deserves much the higher consideration." Lincoln's First Annual Message to Congress, December 3, 1861.



 
Reply With Quote
Old 09-13-2007, 02:45 AM   #9
wehumble
Time to brew!
HBT_LIFETIMESUPPORTER.png
 
wehumble's Avatar
Recipes 
 
Jul 2007
St. Louis, MO
Posts: 156
Liked 2 Times on 2 Posts


Well, I'm kind of glad to hear I'm not the only one with www.kegkits.com issues. Things started out ok, but disentegrated into a refund and going elsewhere for my equipment despite the higher cost.

Great kegerator shots, though; I just got mine running and a fermentation box is next on my list as well!
__________________
Now with 95% less signature!

 
Reply With Quote
Old 09-14-2007, 01:40 AM   #10
uuurang
Recipes 
 
Mar 2007
madison, wi
Posts: 298
Liked 2 Times on 2 Posts


I just gotta say that blue hose is really sexy man! Wow!...is all I gotta say.


__________________

"Labor is prior to, and independent of, capital. Capital is only the fruit of labor, and could never have existed if labor had not first existed. Labor is the superior of capital, and deserves much the higher consideration." Lincoln's First Annual Message to Congress, December 3, 1861.


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kegerator Pics winstonofbeer Home Brewing Photo Forum 9 07-19-2009 10:39 PM
Kegerator - Converted Chest Freezer (pics) Atl300zx Kegerators & Keezers 21 05-13-2009 11:30 PM
Started my kegerator setup... pics of the progress... IanIanBoBian Bottling/Kegging 24 04-22-2009 01:33 AM
I think my fermentation chiller works TOO good Mr. Mojo Rising Equipment/Sanitation 17 06-01-2007 03:28 PM
Check out my kegerator blog, upgraded from single to dual tower mrkrispy Bottling/Kegging 0 05-26-2006 02:31 AM


Forum Jump