Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Keg carbing
Reply
 
Thread Tools
Old 01-23-2013, 03:49 PM   #1
Fletcher21
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Oregon City, Oregon
Posts: 140
Liked 14 Times on 12 Posts

Default Keg carbing

So I have a batch of IPA that I made for the Super Bowl. This is only the seconded time I have kegged a batch of beer. The first time I did the shake method at high pressure and it worked fine ( no over carbonation). However I don't want to risk things and I think I have time to set and forget. My question is do I have the time for the set and forget method if I rack to the keg tonight? If I am cutting it close should I set it to a slightly higher pressure?


Fletcher21 is offline
 
Reply With Quote
Old 01-23-2013, 04:03 PM   #2
freisste
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Ann Arbor, Michigan
Posts: 2,450
Liked 311 Times on 261 Posts

Default

I've never keg carbed, but if it was me, I would force carb with the shake method, but do it less than last time. Unhook the gas line, let the extra pressure out, then set to serving pressure and leave until the Super Bowl.

Basically you are cutting a corner to take maybe a week out of the process, but you are finishing with the set and forget method to ensure you don't go too far.

Will this work? I have no idea. But at least it makes sense to me. Good luck.


freisste is offline
 
Reply With Quote
Old 01-23-2013, 04:11 PM   #3
Rowdy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Brick, New Jersey
Posts: 459
Liked 12 Times on 12 Posts
Likes Given: 2

Default

Chill it set it to 40 psi for 24 hours and if you can put the gas on the liquid side Otherwise 12 psi for two weeks or so.
__________________
Cruiscín Lán Grúdlann
In wine there is wisdom, In beer there is freedom, In water there is bacteria.
Rowdy is offline
 
Reply With Quote
Old 01-23-2013, 04:13 PM   #4
Clearcut23
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Posts: 98
Liked 6 Times on 6 Posts

Default

Quote:
Originally Posted by freisste
I've never keg carbed, but if it was me, I would force carb with the shake method, but do it less than last time. Unhook the gas line, let the extra pressure out, then set to serving pressure and leave until the Super Bowl.

Basically you are cutting a corner to take maybe a week out of the process, but you are finishing with the set and forget method to ensure you don't go too far.

Will this work? I have no idea. But at least it makes sense to me. Good luck.
+1

The shake method is the only way I do it. I crank it up to 50psi and roll it around on the floor for a good 30 mins and then let it sit for the rest of the day. Before I go to bed I release the pressure and drop it down to 10 and throw it in the fridge overnight. The next day it's around 90% carbed and I start drinking it. As long as you leave the gas on it will carb no problem. This Thursday I am filtering and kegging an IPA and then fast carbing the hell out of it to meet the turn in deadline for a competition Saturday.
Clearcut23 is offline
 
Reply With Quote
Old 01-23-2013, 04:20 PM   #5
b-boy
16%er
HBT_LIFETIMESUPPORTER.png
Feedback Score: 5 reviews
 
b-boy's Avatar
Recipes 
 
Join Date: Jun 2011
Location: The Frozen Tundra, NY
Posts: 3,606
Liked 864 Times on 599 Posts
Likes Given: 265

Default

I prefer the set-and-forget method. If I can't do the set-and-forget method I do a combo burst carb.

I do the shake method at 30PSI when the keg is warm. I'll usually let it sit on the CO2 for ~12 hours after I shake. The warmer temperature makes it tough to overcarbonate since warm beer holds less CO2. This gets the keg about 1/2 way carbed.

Then I pop it in the kegerator and cool it while it's hooked up to serving pressure. It usually takes 2-3 days before it settles and gets carbed up properly.

I've done this probably 5-6 times and it's worked well so far. I haven't had any overcarbed kegs, which was a problem when I tried to burst carb cold kegs.

It still takes a week or so, but it cuts a week off of the set-and-forget process.


__________________
Never underestimate the potential of someone who refuses to act their age.
b-boy is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Natural Carbing and Force Carbing Together? rhinofarts Bottling/Kegging 6 05-14-2012 10:15 PM
Carbing Temp? Carbing in a growler? 03rangerxlt Beginners Beer Brewing Forum 2 03-19-2012 12:35 AM
Natural carbing vs. co2 carbing and... Armen_Tamzarian Bottling/Kegging 2 02-11-2011 11:47 PM
force carbing, but not over carbing? Tilldeath Bottling/Kegging 2 01-28-2010 11:30 PM
carbing in the keg mummasan Bottling/Kegging 2 11-23-2007 09:14 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS