just finished my mash/lauter tun - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > just finished my mash/lauter tun
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-23-2013, 06:33 AM   #1
davebstock
Recipes 
 
Jan 2013
Posts: 74
Liked 8 Times on 8 Posts



Any thoughts on this setup? I have not done all grain yet but am setting up for it. I figured it would be easier to use flexible copper tubing and cap it. Wasn't sure if I would have trouble bending once the slots were cut. It kinked up a bit, but with just water it drains 5 gallons in three minutes. Put a 1/2" I.d. drain on it.


Click image for larger version

Name:	ForumRunner_20130123_002732.jpg
Views:	180
Size:	43.8 KB
ID:	96114   Click image for larger version

Name:	ForumRunner_20130123_002751.jpg
Views:	315
Size:	27.7 KB
ID:	96115  
__________________
1 Timothy 5:23

 
Reply With Quote
Old 01-23-2013, 06:37 AM   #2
davebstock
Recipes 
 
Jan 2013
Posts: 74
Liked 8 Times on 8 Posts


When it finishes draining to the level of the valve, there are 28oz left in the tun. Is that to be expected or should the valve be lower? (Not that I could change the existing hole in the cooler)
__________________
1 Timothy 5:23

 
Reply With Quote
Old 01-23-2013, 06:52 AM   #3
teddy4xp
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Feb 2010
Traverse city, Michigan
Posts: 384
Liked 9 Times on 8 Posts


I dont think there is a correct answer....its just the way your system is. I think mine leaves 32oz behind. Just make sure you compensate for the 28oz when you are figuring out your water volume!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
mash tun vs lauter tun Firebat138 Beginners Beer Brewing Forum 13 03-26-2012 02:25 PM
My Mash-Lauter Tun MizooBrew Equipment/Sanitation 7 03-20-2012 03:32 AM
Mash Lauter Tun chemist308 All Grain & Partial Mash Brewing 7 01-08-2009 12:03 AM
mash/lauter tun from a keg perry All Grain & Partial Mash Brewing 7 11-25-2006 10:26 PM


Forum Jump