1/4" FFL Ball Valve for Regulator? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > 1/4" FFL Ball Valve for Regulator?

Thread Tools
Old 09-10-2007, 08:51 PM   #1
jfrizzell's Avatar
Jun 2007
Posts: 686
Liked 12 Times on 10 Posts

I recently purchased a dual regulator setup on eBay (got a great price for a double regulator). The low pressure side of the regulators have check valves installed. The output side of the check valve is a 1/4" MFL connector. Has anyone ran across a ball valve with a 1/4" FFL input and a hose barb output or would I be better off just removing the check valves that came with the regulator and put in a 1/4"NPT ball valve with a bulit in check valve?

Reply With Quote
Old 09-10-2007, 11:29 PM   #2
lustreking's Avatar
Aug 2006
Bethlehem, PA
Posts: 779
Liked 32 Times on 25 Posts

I'd take out the check valve, put in the ball valve in the regulator, and put the check valve in the ball valve.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ball Valve - Do I Need One? eljefe All Grain & Partial Mash Brewing 19 07-18-2009 02:52 AM
Want to make a MLT but no 3/8" Threaded Ball Valve ACo Kettles, Mash Tuns & Hot Liquor Tanks 6 07-13-2009 02:15 AM
SS ball valve balto charlie Equipment/Sanitation 3 08-13-2008 06:28 PM
Why do I need a Ball Valve on my Pot evandam Equipment/Sanitation 19 04-30-2008 05:37 PM
Ball valve mbeattie Equipment/Sanitation 1 02-28-2006 04:17 AM

Forum Jump