Keezer Question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Keezer Question

Reply
 
Thread Tools
Old 01-22-2013, 08:06 PM   #1
Hal9000
Recipes 
 
Apr 2012
_, _
Posts: 17


Hey guys,

Hope this is the correct Sub-forum.

My Neighbor recently gave me a 5lb CO2 cylinder, Regulator, Tap, and Faucet.

I've been looking at the Keezer Builds, and thinking about doing one with a Kenmore 16949

Does anyone have internal dimensions, or know if this will fit a 15.5 Gallon Keg?

Some sexy Keezer Designs:
http://www.homebrewtalk.com/f35/my-k...reezer-145913/
http://www.homebrewtalk.com/f35/keez...d-pics-211485/
http://www.homebrewtalk.com/f51/keez...collar-157610/

I really like the one in this first photo:
http://www.homebrewtalk.com/f35/uber...decide-162427/
__________________
http://www.thevalveforum.com

 
Reply With Quote
Old 01-23-2013, 04:57 PM   #2
Hal9000
Recipes 
 
Apr 2012
_, _
Posts: 17

Bumping this back up.

I found the below information:

Specifications for a U.S. 1/2 barrel keg
Height of keg 23.3 inches
Diameter of keg 16.117.15627 inches
12 fl oz servings 165.6
16 fl oz (1 U.S. pint) servings 124

Could someone with this freezer measure the internal dimensions for me?
__________________
http://www.thevalveforum.com

 
Reply With Quote
Old 01-23-2013, 08:05 PM   #3
Thegreatestgray
Recipes 
 
Jan 2013
Running Springs, California
Posts: 144
Liked 5 Times on 5 Posts


There is a thread that has a bunch of freezer with specs and what will fit in the freezer I don't know how to link it on my phone but its call chest freezers specs and layout so search for that there is a lot of useful info on there

 
Reply With Quote
Old 01-24-2013, 01:04 AM   #4
Hal9000
Recipes 
 
Apr 2012
_, _
Posts: 17

Thanks for the Lead.

I found the thread you referenced, but the Kenmore 8.8 wasn't listed.

I did find the below from user RedRocket:

Quote:
approx. inner dimensions: 16.5" width x 35.75" length x 28" deep
approx. hump dimensions: 16.5" width x 11" length x 10" deep
Which interestingly enough was in the first link in my original post.
__________________
http://www.thevalveforum.com

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer Question bassassassin772 Kegerators & Keezers 1 04-19-2012 06:28 PM
Keezer question Gigemags05 Bottling/Kegging 7 01-16-2012 08:41 PM
Keezer question Hulud Kegerators & Keezers 2 09-21-2011 12:38 PM
Keezer Lid Question Seven Kegerators & Keezers 8 03-11-2011 04:14 PM
One more keezer question AGBrewer Kegerators & Keezers 4 10-29-2007 02:04 AM


Forum Jump