15) Almost done onto the heat lamp. I took the lid of the paint can and cut out a hole. Then screw the lightbulb through the lid into the weatherproof socket. I used extra 300 V wire to wire the light bulb. Run the wire through the back of the fridge and then attach the white 15 A plug.
16) Then attach the bulb to the hot side of the outlet and the fridge to the cold side.
17) Sit back and enjoy your clean looking fermentation chamber/ Kegerator
I figured out this build's wiring from reading through the forum. I didnt want to get too much into the nitty gritty. Feel free to message me if you have any questions. This is my first write up so sorry if it is rough.
Hopefully this helps someone or at least gives them an idea on their DIY project.