Starting kegging, regualtor question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Starting kegging, regualtor question

Reply
 
Thread Tools
Old 09-09-2007, 11:05 PM   #1
Beerrific
 
Beerrific's Avatar
Recipes 
 
Mar 2007
Georgia
Posts: 5,562
Liked 55 Times on 47 Posts



I hope this is an easy one:

If I buy a dual gauge regulator and later decide I want a double regulator, can I just take off the high pressure gage and attach another regulator?


 
Reply With Quote
Old 09-09-2007, 11:22 PM   #2
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
 
olllllo's Avatar
Recipes 
 
Apr 2006
Phoenix, Arizona
Posts: 13,330
Liked 140 Times on 114 Posts


In most cases, yes. The thing you have to be careful about is the threading on the low pressure guage. For example, the low pressure Perlicks that were sold by American Science center were LHT, even though they had a TapRite body. My TapRite regulator and body had RHT.

So I had to find the rare LHT to RHT threaded nipple.

In the end, if you have to, you can thread on some barbed fittings and tubing to make ends meet.
__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
kegging question from a kegging noob RootvonRoot Bottling/Kegging 8 05-22-2009 02:03 PM
Starting gravity question Weizenheimer Extract Brewing 4 09-05-2008 07:03 PM
Micromatic Regualtor Problems Beerrific Bottling/Kegging 15 11-01-2007 08:57 AM
Starting Gravity Question AACJ General Beer Discussion 3 07-29-2006 10:45 PM
Regualtor shopping kornkob Bottling/Kegging 5 04-18-2006 08:00 PM


Forum Jump