• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Pennsylvania Complete 1/2 Barrel Brewery

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

urbangravity

Well-Known Member
Joined
Jun 18, 2012
Messages
81
Reaction score
4
Location
Lancaster
Complete 1/2 Barrel Brewery. Everything going for $6,200. Over $9000 invested in materials alone. Only 15 batches brewed on system. $50 home-brew store gift card added bonus.


Stainless Steel Brewing Stand

• All Stainless Steel Stand with Optional Locking Rollers
• SS LP Tank Rack
• 3 – Temperature Probes (1 on each tank)
• 3 - BG14 10”, 210,000 BTU Burners
• 2 – Stainless Steel Chugger Pumps
• 1 – 60 Plate Wort Chiller
• BCS460 Brewery Control Computer
• 3 – Electronically Controlled Fuel Valves
• 3 – Electronically Controlled Burner Starter
• Steel Control Box
• Wifi Adapter (hardwire option)
• All New Wiring and Conduit Housing

Brewing Vessels

• 1 – 20 Gallon SS Hot Liquor Tank with Site Glass (serves as cold tank for chilling) with Lid
• 1 – 20 Gallon SS Mash Lauter Tun with Sparge Coil in Lid
• 1 – 20 Gallon SS Boil Kettle with Lid
• 3 – Analog Thermometers (optional use)
• 9 Gallon SS Grant with Lid (with 2 SS Tri Clover Fittings)

Brewery Hardware

• SS Fittings (on kettles and stand):
o 6 – SS Ball Valves
o 6 – 1.5” x ½” Female SS Tri Clover NPT
o 16 – 1.5” x ½” Male SS Tri Clover NPT
o 4 – ½” SS T Fittings
o 11 – ½” SS Elbow Fittings
o 4 - 1/2" Compression Fitting
• 18 – 1.5” SS Tri Clover Clamps
• 26 - 1.5” Silicone Gaskets
• 17 - 1.5” x ½” Barbed SS Fittings
• Rotating ½” SS CIP Spray Ball
• ½” x 12” SS Bazooka Screen
• SS Brewing Table
• SS Brew Paddle
• Kettle Volume Stick
• SS Brew Spoon
• 9 – ½” Silicone Transfer Hoses (variance lengths)


Fermentation Vessels

• 1 – 20 Gallon SS Fermenter on Rollers with Thermowell and Ball Valves
• 2 – 15 Gallon Blue Carboy Fermenters
• 2 – Plastic 5 Gallon Bottling Buckets with Spouts and Lids
• 1 – Glass 5 Gallon Carboy with Neck Handle
• 1 – New 3 Gallon Better Bottle Fermenter

Ultimate Grain Mill

• Monster Brewing Hardware MM3 – Three Roller Mill
• Base and Hopper
• Forward and Reverse Motorized Drive
• Steel Stand on Rolling Locking Wheels
• Grind Bucket Included

Supplies and Misc

• Airlocks
• Rubber Stops
• Siphon Cane
• Red Barron Capper
• Hops (Citra, Simcoe, Nugget, Cascade)
• Caps
• Bottles

Kegging Equipment

• Inline Beer Transfer Filter with Fitting (extra cartridges)
• New Upright Converted Refrigerator (holds 3 Corny Kegs)
o 3 Installed Chrome Plated Brass Taps
o 3 Line Manifold with Valves
o 3 Tap SS Drip Tray with Waste Line
• Dual Gauge Regulator with 5 Pound Co2 Tank
• All Beer Lines
• All Gas Lines
• 3 – 5 Gallon SS Corny Kegs
• 2 – 2.5 Gallon SS Corny Kegs
• 1 – 3 Gallon SS Corny Keg
• 1 – Amercian Sanke Keg Head Coupler
• Gas and Liquid Disconnects (Sets)
• Co2 Keg Charger

P1040049.jpg


P1040048.jpg


P1040051.jpg


P1040052.jpg


P1040057.jpg
 
Status
Not open for further replies.
Back
Top