propane manifold/supply sizing - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > propane manifold/supply sizing

Thread Tools
Old 01-12-2013, 04:50 PM   #1
Oct 2006
Posts: 38
Liked 4 Times on 4 Posts

Finishing up my brewstand frame and am ready to move on to the gas....Is there any reason not to use 1/4" black pipe for the propane manifold? It seems most people are using 1/2" and extra reducers/fittings to get to the orifices. I have a BG14 and 2 BG-12s and I am thinking only two at a time would be in use, will be using high pressure and have a 0-30psi regulator. Am I missing something??

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sanity check on burner/propane supply biestie Brew Stands 0 02-12-2012 05:35 PM
Propane supply line craigowens Brew Stands 2 03-12-2011 04:06 AM
Drip irrigation supply tubing for MLT manifold? riromero Kettles, Mash Tuns & Hot Liquor Tanks 3 04-14-2010 03:02 PM
MLT Design: Water Supply Hose vs. Manifold vs. Mesh Bag SeanT Kettles, Mash Tuns & Hot Liquor Tanks 4 02-16-2010 02:20 PM
Manifold Slot Sizing Brewtus Equipment/Sanitation 8 10-17-2005 01:55 PM

Forum Jump