Height, Depth of Danby DAR440 Compressor? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Height, Depth of Danby DAR440 Compressor?
Sign-up To NEW HBT Article Newsletter - Brewing Articles Direct To You!

Thread Tools
Old 01-12-2013, 03:24 PM   #1
Feedback Score: 0 reviews
Join Date: Jan 2009
Location: Tallahassee
Posts: 42
Default Height, Depth of Danby DAR440 Compressor?

I'm considering using this fridge for a fermentation chamber (managed with a Johnson controller). I ferment small batches primarily in 5-gallon food-safe buckets like these: http://beprepared.com/product.asp_Q_...ucket+with+Lid which I have drilled for airlocks. The buckets are approximately 12" in diameter and 15" high.

My question is the height/depth of the compressor in this fridge and the height from the compressor to the interior ceiling of the fridge. I haven't found one of these fridges in a store in the area to try out, and I'd prefer not to hassle with returns once I order it. I wrote the manufacturer and they sent me a spec sheet, which was nice of them but it didn't answer that question. Thanks in advance for any assistance with this question.

K.G. Schneider
kgs is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Danby DAR440 Door Panel is glued in place beerguy2009 Kegerators and Keezers 16 04-22-2013 12:24 AM
Danby DAR440 and Johnson control a419abg-3c probe laserghost Bottling/Kegging 0 11-09-2012 06:20 PM
danby keg compressor problem vms305 Bottling/Kegging 0 08-09-2012 09:21 PM
water depth vs grain depth - batch sparging mhumm1 All Grain & Partial Mash Brewing 9 06-30-2011 03:27 PM
Hole depth vs. hill height Hagen Hops Growing 3 04-01-2008 05:09 PM

Forum Jump