Burner Question - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Burner Question
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 01-11-2013, 06:40 PM   #1
hoppyhoppyhippo
Recipes 
 
Dec 2012
New Brunswick, NJ
Posts: 2,660
Liked 388 Times on 317 Posts



Since my brother and I are in the slow transition of going to AG brewing, but we're gonna be switching to outdoor brewing soon. They're getting a new stove and his SWMBO says that when they get a new stove we have to brew outside. We have an old turkey fryer but it blows at heating and also just deposits soot everywhere. So since I wouldn't want to buy a burner for lets say 50 bucks now then have to buy a bigger one when we need to boil higher volumes. There are 2 that caught my eye initially but I'm very open to other people's suggestions on the burner.

Bayou Burner

Blichmann Floor Standing Burner

Those 2 are probably over kill for extract beers and partial mash but I'd rather have to run a better burner at lower outputs then buy a new one down the line. Maybe we'll switch up and do full 5 gallon boils as well. I expect if all things go well to be doing All-Grain next year with my brother, so it's not like it will be a long time before we're going to need the badass burner.

Edit - Also with the BLichmann do I need anything to attach it to a standard propane tank?



Reason: Blichmann Question

 
Reply With Quote
Old 01-11-2013, 06:54 PM   #2
HeadyKilowatt
Recipes 
 
Jan 2012
Glendie (outside Fredericksburg), VA
Posts: 253
Liked 41 Times on 32 Posts


Both of those burners look fine to me, although I don't personally have experience with either one. But whichever one you get, you should definitely start doing full boils, even for extract brews. Your beer will benefit. Just remember to adjust your hop bill since you'll squeeze out more IBUs with a bigger boil.


__________________
You can't be a real country unless you have a beer and an airline. It helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer. -Frank Zappa

 
Reply With Quote
Old 01-11-2013, 07:06 PM   #3
wyzazz
Recipes 
 
Aug 2009
Atwater, OH
Posts: 4,252
Liked 52 Times on 49 Posts


Both of those have exactly the same burner in them, the only real difference is the stand. The Bichmann is obviously of a little higher quality & made of Stainless Steel, the Bayou Classic is made of Mild Steel by comparison and painted with high temp paint.

Functionally they will both accomplish the same things, you just have to decide if you want the shiny one.

Another (less expensive) option for you might be to clean your existing turkey fryer burner. Try blowing compressed air through the actual burner, pull it apart and clean it well, spiders like to spin webs inside of those things. That makes them clog and get all "sooty". Also try adjusting the air mixture where the hose connects to the actual burner, it should be almost all the way open, if not all the way open.
__________________
Quote:
Originally Posted by Revvy View Post
And I'd like to see my 1.080 beers ready from grain to glass in a week, and served to me by red-headed twin penthouse pets wearing garter belts and fishnet stockings, with Irish accents, calling me "master luv gun," but we can't always get what we want can we? :)

hoppyhoppyhippo Likes This 
Reply With Quote
Old 01-11-2013, 09:02 PM   #4
hoppyhoppyhippo
Recipes 
 
Dec 2012
New Brunswick, NJ
Posts: 2,660
Liked 388 Times on 317 Posts


Thanks for the tips. I thought the burners looked the same.

We've thought about cleaning the fryer, but it's really old and it doesn't have a high output as it is. I think the better heat distribution you'd likely get from that burner alone is a worth it. Not to mention it just takes too long to cook. I've used it enough to accept that the old thing has gone. We've already had to do too much repair to it so I'm sure it's not as safe as a new one is either.

 
Reply With Quote
Old 01-11-2013, 10:05 PM   #5
LuiInIdaho
HBT_LIFETIMESUPPORTER.png
 
LuiInIdaho's Avatar
Recipes 
 
Feb 2011
Ponderay, Idaho
Posts: 442
Liked 29 Times on 23 Posts


Quote:
Originally Posted by hoppyhoppyhippo View Post
Since my brother and I are in the slow transition of going to AG brewing, but we're gonna be switching to outdoor brewing soon. They're getting a new stove and his SWMBO says that when they get a new stove we have to brew outside. We have an old turkey fryer but it blows at heating and also just deposits soot everywhere. So since I wouldn't want to buy a burner for lets say 50 bucks now then have to buy a bigger one when we need to boil higher volumes. There are 2 that caught my eye initially but I'm very open to other people's suggestions on the burner.

Bayou Burner

Blichmann Floor Standing Burner

Those 2 are probably over kill for extract beers and partial mash but I'd rather have to run a better burner at lower outputs then buy a new one down the line. Maybe we'll switch up and do full 5 gallon boils as well. I expect if all things go well to be doing All-Grain next year with my brother, so it's not like it will be a long time before we're going to need the badass burner.

Edit - Also with the BLichmann do I need anything to attach it to a standard propane tank?
I can't speak directly for the Bayou Classic burner, because I have never used one. However, I have the Blichmann and I would think that the Bayou Classic burner shown would be very similar in terms of heating ability and gas consumption, etc. I love the Blichmann. I purchased it because I thought that I might want to go to the Top Tier Stand in the future (buying something now that will be useful in the future is a good thing). I also bought the extended legs for it. The longer legs are great for raising the burner high enough (raising the kettle high enough) so that you can drain from the kettle directly into a fermentation vessel. When I expanded my system recently, there was no question about which burner to add -- another Blichmann. Now I have a stand with two of these babies on it -- and I love these burners.

Mark

 
Reply With Quote
Old 01-12-2013, 04:06 AM   #6
bob352
Recipes 
 
Sep 2009
Colorado
Posts: 101
Liked 8 Times on 6 Posts


+1 for the blichmann
A pleasure to use.
Nothing else needed to attach to a propane tank.

 
Reply With Quote
Old 01-12-2013, 03:09 PM   #7
Conan
Recipes 
 
Apr 2008
Cheektowaga, NY
Posts: 737
Liked 37 Times on 35 Posts


I just bought the Bayou burner without the stand, a BG14, to mount to a fish fryer stand. It was $50 to the door from Amazon, plus about $7 in cold-rolled flat stock with which I'm connecting it to the stand. I've brewed on the fryer stand many times and it's sturdy enough. You could try mounting up the burner to your stand, though the production version looks much nicer. Kyle

 
Reply With Quote
Old 01-12-2013, 03:22 PM   #8
BigRedHopHead
Recipes 
 
Feb 2012
Omaha, NE
Posts: 290
Liked 20 Times on 19 Posts


[QUOTE=wyzazz;4774571]Both of those have exactly the same burner in them, the only real difference is the stand. The Bichmann is obviously of a little higher quality & made of Stainless Steel, the Bayou Classic is made of Mild Steel by comparison and painted with high temp paint.

Yes, but the regulators are different. Blichmann = 10 psi, Banjo = 30 psi. My Blichmann is super quiet. I can think and talk while brewing in the garage.


__________________
Beer is the answer....but I can't remember the question.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
burner question downtobrew Brew Stands 4 10-27-2011 09:13 PM
another burner question Donthoseme Equipment/Sanitation 6 10-03-2011 11:06 PM
Burner Question smmcdermott Beginners Beer Brewing Forum 17 01-20-2010 10:24 PM
Burner Question... Airborneguy Equipment/Sanitation 9 10-25-2009 03:09 AM
Jet burner question donshizzles Equipment/Sanitation 10 08-08-2009 05:56 PM


Forum Jump