Force carbonatation didn't work - Page 2 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Force carbonatation didn't work
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Thread Tools
Old 09-10-2007, 02:40 PM   #11
Aug 2007
Posts: 11

Originally Posted by BierMuncher
I fyou really want to force...FORCE carb your beer, don't mess with the gas connections.

THe shake method is highly effective in carbing beer up fast, but can be a bit unpredictable (too much carb).

Keep the PSI at around 30 and lay the keg across your lap (while your sitting in a chair of course).

Begin shaking the crap out of keg left to right. You'll begin hearing gas come out of the tank and into the keg (bubbling sounds). Shake the keg for 60-90 seconds or so. Stop. Wait until the bubbling stops. Repeat. Keep doing this about 6-7 times and then let it rest over night at the 30PSI.

Next day, close gas valve. Release any excess pressure from keg. Set PSI down to 8-10 (serving pressure), open gas valve and pour a glass. Keep tweaking this process until you get the carbing level you want. At room temperature you are not likely to over carb your beer with this process.

Oh...and get a refrigerator for petes sake.

HEHEHHEHEHE It's coming It's coming... vintage eletric motor fridge


Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
I was told to force carb this way by my homebrew shop... will it work? nerdlogic Bottling/Kegging 15 07-17-2009 09:55 PM
DIY force carbing, will it work? cell DIY Projects 16 06-26-2009 11:01 PM
force carbonation ???????? morbid53 All Grain & Partial Mash Brewing 11 05-14-2007 01:41 AM

Forum Jump