Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > King Kooker 94/90TKD two tier jet burner first boil
Reply
 
Thread Tools
Old 01-09-2013, 01:45 AM   #1
orion7144
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2012
Location: Cinci, Oh
Posts: 338
Liked 31 Times on 27 Posts

Default King Kooker 94/90TKD two tier jet burner first boil

I finally got a chance due to weather to test my jet burner on my king kooker dual burner 2 tier setup. I bought a 15g aluminum kettle with valve and thermowell BIAB setup off of ebay. I needed to burn it in and the weather cooperated today. Stuck 14g of hose water (45f) into the kettle and cranked up the jet burner. Took 50 min to boil witch I thought was too long till I remembered I used water from the outside faucet. I am assuming my time will be reduced once I use my bottled water at room temp.

Tomorrow will be my first AG 10g batch outside. New years was two 5g batches on the electric stove that took ~8 hours. I am guessing I will cut that in half.


orion7144 is offline
 
Reply With Quote
Old 02-26-2013, 07:30 PM   #2
jrodmfish
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Dayton, OH
Posts: 26
Liked 3 Times on 3 Posts

Default

Have you brewed again with this stand? I'm considering building a setup around a king kooker but 50min is a long time.


jrodmfish is offline
 
Reply With Quote
Old 02-26-2013, 08:19 PM   #3
orion7144
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2012
Location: Cinci, Oh
Posts: 338
Liked 31 Times on 27 Posts

Default

Quote:
Originally Posted by jrodmfish View Post
Have you brewed again with this stand? I'm considering building a setup around a king kooker but 50min is a long time.

Yes I have multiple times. It took 50 min since the ground water was pretty cold. Bringing 68f water to 160 for mash is around 15-20 min in my stainless kettle. Once I put the mash water to the kettle and start the boil it is only around 20-25 to boil from 150f. That is with a 14g boil.
orion7144 is offline
 
Reply With Quote
Old 02-11-2015, 07:15 PM   #4
jweidman
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2013
Location: SAN DIEGO, California
Posts: 59
Default

can you use the 15g kettles on the top tier?

i know this is an old thread but i was looking into getting one.
__________________
Want a beer from So Cal? im always open up for trades from other breweries.

I'm looking for a southern Tier Choklat...
jweidman is offline
 
Reply With Quote
Old 02-11-2015, 07:25 PM   #5
mascervesa
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
mascervesa's Avatar
Recipes 
 
Join Date: Jul 2013
Location: Inland Empire, CA
Posts: 47
Liked 6 Times on 5 Posts

Default

Yes you can, I have before with a 15 gallon converted keg and haven't had any problems. But the 2nd tier isn't high enough to gravity feed to the 1st tier. What I did was place the 2nd tier on the side with some modifications to make a one tier- 3 kettle stand. The steel is plenty strong for 13 gallons of wort full in a keggle.
mascervesa is offline
 
Reply With Quote
Old 02-21-2015, 08:21 PM   #6
caver95
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Fort Myers, Florida
Posts: 265
Liked 3 Times on 3 Posts
Likes Given: 10

Default

I just got one and I am looking forward to brewing with it.
ordered a pump and I am looking for a CFC.
caver95 is offline
 
Reply With Quote
Old 06-23-2015, 05:10 PM   #7
Austen_with_an_E
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2015
Location: Denver, CO
Posts: 1
Default

Hi - I know this is a bit of an old thread, but I just bought one of these bad boys and it's getting delivered today!

How did your mods go to make it into a 3-tier?
Austen_with_an_E is offline
 
Reply With Quote
Old 07-01-2015, 06:15 PM   #8
mascervesa
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
mascervesa's Avatar
Recipes 
 
Join Date: Jul 2013
Location: Inland Empire, CA
Posts: 47
Liked 6 Times on 5 Posts

Default

Quote:
Originally Posted by Austen_with_an_E View Post
Hi - I know this is a bit of an old thread, but I just bought one of these bad boys and it's getting delivered today!

How did your mods go to make it into a 3-tier?
If you're referring to my post, I made a single tier, not a 3-tier. You could make a 3 tier, but it would require a lot more fabrication for your HLT on the top tier.


mascervesa is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
King Kooker Dual Burner Cart...thoughts? IncredibleMulk General Beer Discussion 43 12-06-2014 01:47 AM
King Kooker double burner? HickoryMike Equipment/Sanitation 6 07-06-2011 01:09 PM
King Kooker burner question frankstoneline Equipment/Sanitation 5 01-17-2011 11:55 PM
King Kooker propane burner... reviews sought. Zymurgrafi Equipment/Sanitation 24 05-13-2007 03:33 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS