I have done a tremendous amount of searching and looking at other's keezer plans, but still not sure the answer to this.
I built a 7 1/2 tall collar using cut-down 2x10 lumber on top of a Kenmore 5.1 chest freezer. I attached the collar to the freezer with silicone, filled all joints and insulated with 1-inch foam.
Where the freezer lid/gasket coses onto the wood collar, do I need to cap the wood with anything or use any additional gasketing/weatherstripping, or is the freezer gasket to wood connection sufficient?
Thanks, i will share pics when it is completed.