Originally Posted by LazySumo
Can you post a pic of it in final w/ the lid open? And this is an amazing job here, btw!!
Not sure which 'lid' you meant, so here are a few more blurry pics taken with my call camera..
Top down view inside the coffin, solid foam insulation on the sides and in the middle to reduce air space, foil tape to seal air in at joints.
There is a 1" lip and a matching 1" thick foam insulation piece adhered to the coffin lid that fits in to seal everything up.
The LED wiring is flat so it is just squished between the pieces of wood and run behind the insulation inside. It has a remote to operate which I hung off the back (seen on left corner).
And if you meant the main 'lid' here that is, the only computer fan I had lieing around is way to big for the hole but it moves a lot of air! Also the air pistons are nice piece of mind as it attaches the freezer to the base so I don't need to worry about it going over backwards, which I could see as a real possibility!
There is JUST enough room for 4 kegs and 1 carboy for lagering, got lucky! Also some harvested yeast on the hump