Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Boil question
Reply
 
Thread Tools
Old 01-07-2013, 12:31 AM   #1
waxwader
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 24
Default Boil question

I brewed my first English Brown Ale a few days ago. During the 60 minute boil I noticed that a large layer of foam developed. Which I have read is completely normal, but it left a lot of sediment looking material on the sides of the inside of my pot. I did not stir this material back in I simply left it on the walls of the pot and racked the wort away from it. What was this and should I have mixed it back into the wort as the foam subsided?


waxwader is offline
 
Reply With Quote
Old 01-07-2013, 01:34 AM   #2
jwalk4
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: London, Ontario
Posts: 478
Liked 45 Times on 38 Posts
Likes Given: 24

Default

I'm no boil expert, so I can't tell you everything that is going on during the boil, but I believe you are talking about the hot break material. Hot break material is basically protein strands that have clumped and coagulated together during the boil (aka not necessary to have in your boil kettle but something you probably want out of your primary fermenter).

In my experience, I also get some hop material (I use pellets) stuck to the sides of my kettle which I will stir back in. But, once again, its not something I want in my fermenter.

So, its really up to you. If you want to keep that stuff in the boil, then scoop it in; if not, leave it out. I'm sure the effect on your beer will be negligible either way.


__________________
Fermenter 1 - BierMuncher's Centennial Blonde
Fermenter 2 - dusty
Bottle/Keg conditioning - parched
Drinking - Mynx and Maple's Too Wild Mild, various craft brews
jwalk4 is online now
 
Reply With Quote
Old 01-07-2013, 01:36 AM   #3
jwalk4
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: London, Ontario
Posts: 478
Liked 45 Times on 38 Posts
Likes Given: 24

Default

Oh, and also if you want to keep the hot and cold break material out of your fermenter (which you probably do), then whirlpool your wort as you chill, stir it in one direction gently so as not to oxidize your beer, and the crap you want left behind should gather in the center of your boil pot.
__________________
Fermenter 1 - BierMuncher's Centennial Blonde
Fermenter 2 - dusty
Bottle/Keg conditioning - parched
Drinking - Mynx and Maple's Too Wild Mild, various craft brews
jwalk4 is online now
 
Reply With Quote
Old 01-07-2013, 01:51 AM   #4
waxwader
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 24
Default

Thanks for the input. I'll need plenty as I move forward with this hobby. I definitely made an effort to keep it out of my primary. Hopefully it was hot break and was something I didn't need in the wort during the boil.
waxwader is offline
 
Reply With Quote
Old 01-07-2013, 01:54 AM   #5
jwalk4
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: London, Ontario
Posts: 478
Liked 45 Times on 38 Posts
Likes Given: 24

Default

I'm sure you'll be fine. Feel free to look around the site, or Google even, for different opinions about hot and cold break materials.

Was it an extract, partial or all grain batch? Not that it matters greatly, I'm just curious.
__________________
Fermenter 1 - BierMuncher's Centennial Blonde
Fermenter 2 - dusty
Bottle/Keg conditioning - parched
Drinking - Mynx and Maple's Too Wild Mild, various craft brews
jwalk4 is online now
 
Reply With Quote
Old 01-07-2013, 01:57 AM   #6
waxwader
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 24
Default

It was a partial batch.
waxwader is offline
 
Reply With Quote
Old 01-07-2013, 02:01 AM   #7
kh54s10
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
kh54s10's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Tiverton, Rhode Island
Posts: 8,160
Liked 909 Times on 759 Posts
Likes Given: 237

Default

The foaming at the start of the boil it totally normal and unavoidable. You do not need to be concerned with that.

You can transfer everything from the boil kettle to your fermenter. It will settle with time. I prefer not to loose the beer that is in the trub so I use a paint strainer bag to contain the hop residue. I then pour all but the thickest sludge from the boil kettle into the fermenter.

If there is a lot of sludge in the kettle, which is not often, I will strain some of it to get as much wort as possible.


kh54s10 is online now
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Full Boil Extract Boil with question on batch volumes tjashing Extract Brewing 11 05-02-2012 03:19 PM
Partial Boil and Full Boil question MomsBrewing Beginners Beer Brewing Forum 13 02-08-2011 08:21 PM
Question about water amount in full boil or partial boil neldred Beginners Beer Brewing Forum 6 10-17-2009 03:50 AM
Question about full boil vs. partial boil with kits Jaha35 Beginners Beer Brewing Forum 5 04-29-2009 10:37 PM
full boil/partial boil question KingC Beginners Beer Brewing Forum 2 01-14-2008 05:34 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS