Great before carbonating, bad after - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Great before carbonating, bad after

Reply
 
Thread Tools
Old 01-06-2013, 04:24 PM   #1
Wesjmc
Recipes 
 
Apr 2011
Tucson, Az
Posts: 17
Liked 1 Times on 1 Posts



I have been having this issue for a while now. On bottling day I taste my beer and it is fantastic. A week into bottle conditioning, I taste it again because I taste it all through the process, and it's still great (but flat of course). At 2 weeks into bottle conditioning I taste it and the flavor has DRASTICALLY changed. This change always happens at the 2-3 week mark. After that it stays constant, no better, no worse with extended aging. The weird thing is it ONLY happens with my hoppy pale beers. My porters taste great on bottling day and even better after a month.

My first thought was oxidation. So I spent a few hundred dollars on a fridge/kegging setup. I brewed a Mission St Pale Ale clone from the CYBI show. It tasted spot on cloned on kegging day. I flushed all the air out of the keg with C02 then slowly transferred without any splashing. Again, flat but tasty after a week, one of the best pale ales I've ever had. The dry hop aroma filled the air. After 2 weeks the carbonation was getting there, but the hop aroma and flavor were virtually non existent, and the other flavors tasted watered down. It tasted the opposite of "clean," not really musty, just a bit dirty, muddled, and thin.

My second thought was oxidation. So I went with 100% RO water (9 gallons) with 2 tsp CaCl and 2 tsp Gypsum. Same exact bland off flavor.

My third thought was sanitation. So I replaced all my hoses. Soaked EVERYTHING in PBW for a few hours. Rinsed everything obsessively and soaked everything in Star San for an hour or so. No improvement.

This is driving me crazy. Pale ales and IPAs are my favorite styles to drink, and after about 40 extract brews and 10 all-grain, I've yet to brew but one or two that were enjoyable. Every single porter, stout, belgian, or wheat beer I've made has been great though. Please help me figure this out!!!

 
Reply With Quote
Old 01-06-2013, 04:39 PM   #2
aiptasia
 
aiptasia's Avatar
Recipes 
 
Jul 2011
Them Scary Woods, FL
Posts: 3,487
Liked 542 Times on 479 Posts


Oxidation usually occurs at bottling/kegging, when the beer is exposed to too much oxygen and it develops that wet cardboard mung flavor after a few weeks. I don't think that's your problem as you seem to be careful on your racking from primary to keg.

I think your issue is your hop additions. The secret to big hops aroma and flavor in your beer is by doing a lot of late addition hops at flameout/whirlpool, passing your beer through a hops rocket/randalizer prior to bottling, or just doing a nice big dry hop on your beer.

The volatile oils that are essential for that nice hops aroma and flavor tend to boil off and/or fade fast from your IPA's if you don't use enough, or add them too soon in the boil or don't use enough late hops additions.

Check out what Jamil Zanischeff has to say on the subject here: http://www.mrmalty.com/late_hopping.php
__________________
Paranormal Brewing
Beer so good, it's frightening.

2014: Seven Heavens Series One: Vilon, Mystic Melomel, Skeeter Pee.

 
Reply With Quote
Old 01-06-2013, 05:01 PM   #3
b-boy
16%er
HBT_LIFETIMESUPPORTER.png
 
b-boy's Avatar
Recipes 
 
Jun 2011
The Frozen Tundra, NY
Posts: 4,307
Liked 1209 Times on 788 Posts


I've had the same experience - especially the 'missing hops' problem. I don't know what causes it, but it improved when I addressed my water. I got a water report, a copy of EZ-Water, and started adjusting my water chemistry. It made a big difference.
__________________
Never underestimate the potential of someone who refuses to act their age.

 
Reply With Quote
Old 01-06-2013, 05:26 PM   #4
Wesjmc
Recipes 
 
Apr 2011
Tucson, Az
Posts: 17
Liked 1 Times on 1 Posts


Thanks for the help guys!

b-boy, I've gotten a water report, and have done similar to you with EZ-water/Beersmith + salt additions. I was blending my water with RO water up until the last couple batches. For this APA I did pure RO water with 2 tsp each of CaCl and Gypsum. The previous IPA I did with pure RO water and 1 tsp CaCl and 3 tsp gypsum to accentuate the hops, to no avail. For now, I'm going to stick to RO water to help control the variables.

aiptasia, that article was very interesting and informative. I feel like I've been doing basically what they're suggesting (just not to such an extreme degree). Here is my latest recipe:

8# 2-row
1.5# munich
0.5# cara-pils

0.12 oz chinook - 90 min
0.25 oz chinook - 30 min
1 oz cascade - 0 min (45 min whirlpool/steep)
0.5 oz centennial - 0 min (45 min whirlpool/steep)
1 oz cascade - dry hop
0.5 oz centennial - dry hop
0.25 oz chinook - dry hop

I was skeptical of such a long whirlpool/steep, but the guys at the BN got this info directly from Matt Brynildson of Firestone Walker. Maybe I'll do a modification of this recipe with no whirlpool/steep and adjust the late hop additions for my desired IBU.

I know hop flavor/aroma are the first to fade, I'm just puzzled at how amazing my APAs/IPAs have tasted right up to the point of carbonation.

 
Reply With Quote
Old 01-06-2013, 10:12 PM   #5
JuanMoore
 
JuanMoore's Avatar
Recipes 
 
Oct 2009
The Old Pueblo
Posts: 22,007
Liked 3693 Times on 3514 Posts


What's your dry hop process? My first suggestion based on looking at the recipe would be more dry hops, and maybe more whirlpool hops as well.

FWIW I transfer into my serving keg after ~3-6 weeks in primary, and add my dry hops to the keg. The keg then gets purged and sealed, and allowed to stay at fermentation temps for 7-10 days. Then I put the keg in the keezer and carbonate and serve it. The hops stay in the keg until it's empty. One of the reasons I started dry hopping in the sealed keg was that the fermenter always smelled wonderfully hoppy during the dry hop process before, which made me think I was losing a lot of the aroma. For a lot of hop aroma and flavor, I use 3-6 oz of dry hops for each 5 gal keg.
__________________
I'm trying to find some porn filmed by a dog wearing a GoPro. - SharonaZamboni

Hunter, when you get bored, will you put a taco in my elephant's hands for me? - Hat

 
Reply With Quote
Old 01-06-2013, 11:36 PM   #6
Wesjmc
Recipes 
 
Apr 2011
Tucson, Az
Posts: 17
Liked 1 Times on 1 Posts


I typically ferment for a week in primary. Then transfer to secondary on the dry hops and let that sit for 1-2 weeks then bottle/keg. This time I took the Tasty McDole approach of dry hopping in the primary right at the tail end of fermentation (the very tail end). His reason is to fight oxidation at every step. Essentially if you dry hop while the yeast is still getting that last couple gravity points it will also scrub out the oxygen introduced by dumping in the dry hops. The pro is that almost no oxidation occurs. The con is you need to use more dry hops since some of the volatile hop compounds will get pulled out by the yeast.

From all these helpful posts I'm thinking I just need to add more late/dry hops. The one frustration that remains is that the beer not only loses hop flavor/aroma, but just doesn't taste very clean at all. They have an off flavor i simply cant put into words aside from saying "not clean." It may be that my hoppy beers are built around very simple malt bills to accentuate the hops. Take away the hoppyness and its a pretty naked beer with nothing for the slightest off flavors to hide behind. Maybe this is why all my other beers (especially dark beers) taste fantastic.

 
Reply With Quote
Old 01-07-2013, 02:48 AM   #7
JuanMoore
 
JuanMoore's Avatar
Recipes 
 
Oct 2009
The Old Pueblo
Posts: 22,007
Liked 3693 Times on 3514 Posts


Quote:
Originally Posted by Wesjmc View Post
I typically ferment for a week in primary. Then transfer to secondary on the dry hops and let that sit for 1-2 weeks then bottle/keg. This time I took the Tasty McDole approach of dry hopping in the primary right at the tail end of fermentation (the very tail end). His reason is to fight oxidation at every step. Essentially if you dry hop while the yeast is still getting that last couple gravity points it will also scrub out the oxygen introduced by dumping in the dry hops. The pro is that almost no oxidation occurs. The con is you need to use more dry hops since some of the volatile hop compounds will get pulled out by the yeast.

From all these helpful posts I'm thinking I just need to add more late/dry hops. The one frustration that remains is that the beer not only loses hop flavor/aroma, but just doesn't taste very clean at all. They have an off flavor i simply cant put into words aside from saying "not clean." It may be that my hoppy beers are built around very simple malt bills to accentuate the hops. Take away the hoppyness and its a pretty naked beer with nothing for the slightest off flavors to hide behind. Maybe this is why all my other beers (especially dark beers) taste fantastic.
If it's only your lighter beers, that makes me think it could be a water issue. Living in Tucson, I know first hand how drastically the water profile varies from month to month here. The total hardness at the city well closest to my house ranges from ~60ppb to nearly 300ppb depending on when you test it. What water report are you using? The annual average, or most recent, or did you send a sample in to be tested?
__________________
I'm trying to find some porn filmed by a dog wearing a GoPro. - SharonaZamboni

Hunter, when you get bored, will you put a taco in my elephant's hands for me? - Hat

 
Reply With Quote
Old 01-09-2013, 02:21 PM   #8
Wesjmc
Recipes 
 
Apr 2011
Tucson, Az
Posts: 17
Liked 1 Times on 1 Posts


I called our city water department and the guy emailed me a spreadsheet of the mineral content from monthly readings from the nearest water source to my house, but like I said, I'm sick of hassling with that and have been using RO water with CaCl and Gypsum.

Another strange thing I forgot to mention is I used WLP002 which should have a 63-70% attenuation. I got 84% attenuation! OG=1.051 and FG=1.008. I knew I was going to get good attenuation as I made a 2L starter and I'm still figuring out my mash system. So I mashed low at 43-45F for 60min then raised it to the low 50s for 15min then mashed out at 68F and batch sparged.

Could this low mash temp really get me 85% efficiency out of WLP002 or does there have to be some wild yeast at work? Man, this is frustrating. I cleaned/sanitized obsessively, but I guess I could have missed something.

 
Reply With Quote
Old 05-04-2016, 07:59 PM   #9
frittsbier
Recipes 
 
Mar 2016
Posts: 6


I want to bump this thread as I've had the same issue with several batches now and haven't identified the issue.

Three batches in a row now, the first day of tastings out of the keg are phenomenal. The hop profiles have lots of depth. Just made this Citra Pale Ale and it was so bright with loads of tropical notes and aroma. One week later, and the hop profile has evolved into a bland, "muddy", bitter taste, robbing all the complexity of flavors and sweetness.

I thought it may have been the water profile, but I used spring water for everything and got the same result. Any other suggestions out there?

 
Reply With Quote
Old 05-04-2016, 08:09 PM   #10
beskone
Recipes 
 
Nov 2014
Posts: 279
Liked 72 Times on 55 Posts


Are you maybe accidentally overcarbing?

I did this recently to an IPA. Was so aromatic, juicy and hop forward.

I accidentally switched gas lines when moving things around my keezer and put it on 40psi gas for half the day. Backed the pressure down and WHAM, carbonic bite, harsh bitterness, no aroma at all

Purged the keg over a few days to off gas it, put it back to 10psi to equalize and server and it was back to being tasty, delicious and aromatic again.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looks Great, Smells Great, Tastes....... MisterGreen Extract Brewing 13 06-10-2011 06:09 PM
is it carbonating? cmatthew4 Beginners Beer Brewing Forum 9 08-26-2010 08:37 PM
great great great grand dad RockJeep Commercial Brew Discussion 15 08-16-2009 10:04 PM
Great day for great beer peterfuse General Beer Discussion 2 11-24-2007 03:32 AM
Great place in NJ to get great beer! Erbium:YAG Commercial Brew Discussion 3 09-29-2006 12:59 PM


Forum Jump