Inline oxygen system - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Home Brewing Photo Forum > Inline oxygen system

Reply
 
Thread Tools
Old 01-06-2013, 01:42 AM   #1
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts



Testing out the mobile app, but just finished the inline oxygen stone

 
Reply With Quote
Old 01-06-2013, 01:43 AM   #2
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts


Ya that pic didn't come through.

Camlocks from bargainfittings and the stone from Williams Brewing.

 
Reply With Quote
Old 01-06-2013, 01:51 AM   #3
mccumath
 
mccumath's Avatar
Recipes 
 
Dec 2010
Idaho
Posts: 1,061
Liked 198 Times on 191 Posts


Any other pics? Looks like a great idea! Stone mounted inside the T?
__________________
Put it all in the primary, and let the BeerGods sort it out

 
Reply With Quote
Old 01-06-2013, 01:55 AM   #4
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts


Kinda hard to see, but without that female end on there, I was able to crank it down just enough that the stone is touching the other side, but screwed in enough that it shouldn't leak.


 
Reply With Quote
Old 01-06-2013, 01:57 AM   #5
mccumath
 
mccumath's Avatar
Recipes 
 
Dec 2010
Idaho
Posts: 1,061
Liked 198 Times on 191 Posts


Quote:
Originally Posted by mpcluever
Kinda hard to see, but without that female end on there, I was able to crank it down just enough that the stone is touching the other side, but screwed in enough that it shouldn't leak.

http://i83.photobucket.com/albums/j3...-53-33_386.jpg
So the stone fits snugly in the T, and the input O.D. of the stone roughly mates up to the size of the I.D. of the hose barb?
__________________
Put it all in the primary, and let the BeerGods sort it out

 
Reply With Quote
Old 01-06-2013, 02:05 AM   #6
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts


Sorry, don't quite follow. It's a 1/2" Tee with came locks on both ends so it connects inline with my current system. The stone is kind of wide such that I worry a little bit about flow, but there's enough room going past it that it should be just fine. Looks like a 3/8" barb so I'll use 5/16" bev tubing and put air tool quick connects on such that I can just wrap it up with the Tee on the end and connect it all to the tank as needed.

 
Reply With Quote
Old 01-06-2013, 02:07 AM   #7
mccumath
 
mccumath's Avatar
Recipes 
 
Dec 2010
Idaho
Posts: 1,061
Liked 198 Times on 191 Posts


Quote:
Originally Posted by mpcluever
Sorry, don't quite follow. It's a 1/2" Tee with came locks on both ends so it connects inline with my current system. The stone is kind of wide such that I worry a little bit about flow, but there's enough room going past it that it should be just fine. Looks like a 3/8" barb so I'll use 5/16" bev tubing and put air tool quick connects on such that I can just wrap it up with the Tee on the end and connect it all to the tank as needed.
How does the stone connect to the barb inside the T? Or does the stone connect directly into the barb on the inside of the fitting?
__________________
Put it all in the primary, and let the BeerGods sort it out

 
Reply With Quote
Old 01-06-2013, 02:10 AM   #8
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts


And here's the whole assembly after the chiller.



 
Reply With Quote
Old 01-06-2013, 02:21 AM   #9
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts




 
Reply With Quote
Old 01-06-2013, 03:30 AM   #10
mpcluever
Recipes 
 
Jun 2010
here
Posts: 635
Liked 39 Times on 34 Posts


This is the stone

http://www.williamsbrewing.com/12-NP...P3076C106.aspx

TBaGZ Likes This 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inline filter for pure oxygen? Windigstadt Equipment/Sanitation 12 11-08-2014 02:27 PM
Inline Thermometer/Oxygen Fitting headfullahops Equipment/Sanitation 8 02-16-2013 04:43 PM
WTB inline oxygen stone (1/2" MPT) TomRep For Sale 10 01-24-2012 09:04 PM
Inline O2 system users, difusion stone sanitation? dfess1 Equipment/Sanitation 3 01-16-2012 05:36 PM
Inline oxygen stone question Mike3701 Equipment/Sanitation 3 11-29-2011 02:21 AM


Forum Jump