Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Mesh filter placement in Round cooler MLT
Reply
 
Thread Tools
Old 01-05-2013, 12:01 AM   #1
W0rthog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 197
Liked 8 Times on 7 Posts
Likes Given: 1

Default Mesh filter placement in Round cooler MLT

I'm trying to figure out a solution to position the stainless steel braided hose on the bottom of the round cooler mash tun I'm building. Most of the bulk head kits position the exit fitting at the same height as the factory hole of the cooler. When testing, I noticed a couple inches of liquid gets left behind in the cooler. Therefore, I'm trying to find a fitting combination that will position my braided loop on the bottom. Anyone have success with this or am I over thinking things?

Thanks in advance.


W0rthog is offline
 
Reply With Quote
Old 01-05-2013, 07:51 PM   #2
W0rthog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 197
Liked 8 Times on 7 Posts
Likes Given: 1

Default

Never mind, I've place the order
W0rthog is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Attaching mesh bags to auto siphon to filter out trub - will this work? xmacro Beginners Beer Brewing Forum 5 09-20-2012 03:31 PM
Stainless steel mesh filter Tico All Grain & Partial Mash Brewing 7 07-20-2012 02:53 PM
Nylon mesh lint trap as syphon filter JBCSL Equipment/Sanitation 1 03-05-2012 11:31 PM
Keg dip tube ss mesh filter ? JRems Bottling/Kegging 6 11-01-2011 04:00 AM
Mesh filter for bottling bucket to prevent racking cane clog? timbudtwo Bottling/Kegging 4 02-10-2011 10:12 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS