Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > acidulated malt in Porter
Reply
 
Thread Tools
Old 01-02-2013, 04:37 AM   #1
badlee
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Thailand, Chiang mai,Thailand
Posts: 1,841
Liked 135 Times on 109 Posts
Likes Given: 16

Default acidulated malt in Porter

So..... I will have a small amount of acidulated malt(500gr) mid month when my dad comes to visit and have wanted to do a porter for quite some time.
I would be looking at a wimpy OG of no more that 1045 I think.
Things I have or will have; 3kg MO
500gr acid malt
500gr med. crystal
loads of black and chocolate malt
roasted barley

for yeast I have(0r will have available) s-04, s-33 and Brett B trois
Anyone have any ideas on a recipe formulation for me?
Cheers very much
Lee


badlee is offline
 
Reply With Quote
Old 01-02-2013, 04:53 AM   #2
chumpsteak
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Meridian, ID
Posts: 852
Liked 95 Times on 79 Posts
Likes Given: 13

Default

Why are you adding acidulated malt to a Porter? Your mash pH should be plenty low without adding additional acid. Are you trying to give the beer a sour taste?


__________________
Well lucky you, the devil made you look....
chumpsteak is offline
 
Reply With Quote
Old 01-02-2013, 05:11 AM   #3
badlee
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Thailand, Chiang mai,Thailand
Posts: 1,841
Liked 135 Times on 109 Posts
Likes Given: 16

Default

yup, a sour twang is what I am trying to get.
I will never go down the road of a sour mash again after the terrible things it did to my house(not to mention my relationship with thr Mrs!)
badlee is offline
 
Reply With Quote
Old 01-02-2013, 05:33 AM   #4
MVKTR2
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Tupelo, MS
Posts: 1,116
Liked 32 Times on 30 Posts
Likes Given: 33

Default

I don't say this from experience so take it with a grain of salt. However the literature on the subject suggest using 1-1.5% acid malt in the grist of some guinness stout clones. Thus if you're looking for more twang than that you could double it to 3% or if you're a truly brave soul 4.5%.

Also adding too much could mess up the pH of your mash so I'd wait till the 45 minute mark then add in the acid malt and let it sit for 30 more minutes. This way it won't interfere with your mash process but you'll be able to get acid from the mash process.

My $.02, worth almost as much!
__________________
"Perhaps wisdom for me is understanding how truely small I am, and that there is no smug self centered moment of clarity when there is so much more to learn" Anthony Bourdain
MVKTR2 is offline
 
Reply With Quote
Old 01-02-2013, 06:00 AM   #5
bierhaus15
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: , New York
Posts: 1,524
Liked 89 Times on 62 Posts
Likes Given: 11

Default

I've used acid malt a fair amount in the past for water adjustment in lagers and 1-3% really isn't enough to give a discernible tartness. If you want twang, go higher towards 6-7% and that might still not be enough.
bierhaus15 is offline
 
Reply With Quote
Old 01-02-2013, 07:22 AM   #6
ShackNasty
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Redding, CA
Posts: 89
Liked 11 Times on 11 Posts
Likes Given: 2

Default

I recently brewed a dry stout (Guinness-esk if you will), in which I added 1% acidulated malt to the grist. There was definitely a sourness to it that was easily perceivable, but not so much so that it didn't taste because in all honesty I loved it! Some will suggest that any sourness you get from acidulated malt is just a figment of one's imagination, but I do not buy into this. There was definitely a "sour twang," and I liked it a lot. The stout I brewed was also on the lower gravity end and I only used 1oz acid malt for a 3 gal batch. This is just my experience with it. I say go for it.
ShackNasty is offline
 
Reply With Quote
Old 01-02-2013, 01:30 PM   #7
badlee
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Thailand, Chiang mai,Thailand
Posts: 1,841
Liked 135 Times on 109 Posts
Likes Given: 16

Default

From what i saw on the weyermann site, they recomend 8% for a berliner weisse. That would probably be too much, so was thinking 3.5%-5%.
Now it gets hard:hopping. I have some chinook,saaz, northern brewer and ekg(1oz) some fuggle and tettnenger 2oz.
I have to be hard on my self here,otherwise i will just hop the hell out of it.
badlee is offline
 
Reply With Quote
Old 01-03-2013, 09:23 PM   #8
chumpsteak
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Meridian, ID
Posts: 852
Liked 95 Times on 79 Posts
Likes Given: 13

Default

Quote:
Originally Posted by ShackNasty View Post
I recently brewed a dry stout (Guinness-esk if you will), in which I added 1% acidulated malt to the grist. There was definitely a sourness to it that was easily perceivable, but not so much so that it didn't taste because in all honesty I loved it! Some will suggest that any sourness you get from acidulated malt is just a figment of one's imagination, but I do not buy into this. There was definitely a "sour twang," and I liked it a lot. The stout I brewed was also on the lower gravity end and I only used 1oz acid malt for a 3 gal batch. This is just my experience with it. I say go for it.
I'd be willing to bet your sour or tart taste was more likely from the roasted malts. 1% is almost nothing.
__________________
Well lucky you, the devil made you look....
chumpsteak is offline
 
Reply With Quote
Old 01-04-2013, 01:23 AM   #9
badlee
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Thailand, Chiang mai,Thailand
Posts: 1,841
Liked 135 Times on 109 Posts
Likes Given: 16

Default

yeh, I got that feeling too.
I was thinking 4% or maybe 5% to be very daring!
badlee is offline
 
Reply With Quote
Old 01-04-2013, 01:33 PM   #10
badlee
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Thailand, Chiang mai,Thailand
Posts: 1,841
Liked 135 Times on 109 Posts
Likes Given: 16

Default

Bump
Any ideas for me on formulation?
Doesnt need to be porter per se, just a dark side brew.


badlee is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Acidulated Malt GiraffeBrew All Grain & Partial Mash Brewing 22 10-27-2014 12:52 PM
Acidulated Malt? yourdudeness Recipes/Ingredients 3 03-05-2010 01:43 AM
Acidulated Malt & 5.2 telejunkie Recipes/Ingredients 2 11-20-2009 08:59 PM
acidulated malt versus adding wine to your malt rgalbin Recipes/Ingredients 2 03-04-2009 01:10 PM
Acidulated malt--how much? cweston All Grain & Partial Mash Brewing 11 03-27-2007 05:18 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS