help on final eherm touches - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > help on final eherm touches

Thread Tools
Old 12-30-2012, 12:32 AM   #1
MMessenger79's Avatar
May 2012
Monticello, NY
Posts: 23

I am almost done with my eherms build. I am using a 50L keggle for an hlt, a 10 gallon Cooler for a mlt, and a 15.5 gallon keggle for a bk,1 pump. I am looking for recommendations for a false bottom (I currently use a cpvc manifold) and materials for the coil. I was thinking of for the coil and compression fittings. I am way over budget on this project so I was thinking that copper and brass might be the way to save some money. I am using camlocks for the hoses. Any help would be greatly appreciated.

Reply With Quote
Old 12-30-2012, 04:41 AM   #2
Sep 2012
St Louis, MO
Posts: 10

You could use aluminum cam locks instead of stainless steel. I'd stay with a SS false bottom.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
How "final" is a final gravity reading of a static fermentation (i.e. - no stirplate) grndslm General Beer Discussion 4 06-28-2012 04:40 AM
Low SG, what can I do to help final ABC? crjohn02 Beginners Beer Brewing Forum 5 05-26-2011 01:10 AM
Why is my final ABV so low? thomrenault Beginners Beer Brewing Forum 7 01-27-2011 06:30 AM
Final Touches its02003 Equipment/Sanitation 12 09-13-2008 07:27 PM
Using my Hydrometer - Touches the sides of the tube Jewrican Beginners Beer Brewing Forum 14 09-04-2008 07:27 PM

Forum Jump