foamy beer again tried every thing. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > foamy beer again tried every thing.

Reply
 
Thread Tools
Old 12-29-2012, 02:15 PM   #1
Math_thomas
Recipes 
 
Dec 2012
Posts: 14
Liked 1 Times on 1 Posts



hi all this is my fist post so bear with me
i know this is a common problem but i have read and tried every thing.
every time i pore a beer from my keg i get a cup of foam.
I'm using a UK commercial keg its a bit like a us sanke.
i have my regulator set at 10 psi.
I use 8 meters of hose between the keg and my dispensing tap which is and 26 feet i believe. it is a black hose with i think is usually used for the gas line. i ordered clear but the store sent me a black line. did't think it would matter. dose it?
the length between the co2 bottle and the keg is about 1 meter so about 3 feet. don't think that would make a difference.
i have left my keg out side. thought this would be the coolest place for it. its December in the UK so temperature don't go above about 8C or about 48F.
any advice or if you need more info so you can help place get in contact thanks loads. really wanted to get it sorted for new years eve.

 
Reply With Quote
Old 12-29-2012, 02:26 PM   #2
raouliii
HBT_SUPPORTER.png
 
raouliii's Avatar
Recipes 
 
Aug 2011
Ponchatoula, LA
Posts: 1,019
Liked 118 Times on 102 Posts


The inside diameter of your beer line is critical to having a balanced system. What is the inside diameter of the hose? Generally, 3/16" is used for beer line. If the diameter is relatively large, the lack of friction allows CO2 to come out of solution as it is flowing, resulting in foam.

There may be another reason for your foam, but your non-standard beer line sound suspicious.
__________________
On Tap:
LeftOvers Amber
Rearranger IPA - Chinook, Simcoe, Cascade
Ponchy Pale Ale - Millennium and Willamette
NippleRub Ultra (Light Lager w/Mexican Lager yeast)

In the Chamber:
Nothing

Next Up:
A Light Lager

 
Reply With Quote
Old 12-29-2012, 02:32 PM   #3
jdub1782
HBT_SUPPORTER.png
Recipes 
 
Jan 2012
Aurora, IL
Posts: 109
Liked 7 Times on 7 Posts


What diameter is the hose? Typically the beer line is 3/16" (about 4.7mm) and the gas line is 5/16" (about 7.9mm). I would try a proper beer hose, the smaller diameter will help, and you may have problems with off flavors if the gas line is not designed for beer delivery. If you use a 3/16" beer lines you should only need about 3 meters in length as well.

 
Reply With Quote
Old 12-29-2012, 02:51 PM   #4
Math_thomas
Recipes 
 
Dec 2012
Posts: 14
Liked 1 Times on 1 Posts


thanks for the suggestion. i am using 3/8 line. is this the problem?
is there any solution i can use before new years eve because i can't see me getting more line before then.
thanks loads

 
Reply With Quote
Old 12-29-2012, 02:57 PM   #5
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 17,168
Liked 2925 Times on 2184 Posts


Quote:
Originally Posted by Math_thomas View Post
thanks for the suggestion. i am using 3/8 line. is this the problem?
is there any solution i can use before new years eve because i can't see me getting more line before then.
thanks loads
I would definitely replace that 3/8" ID line as you'd need a ridiculous amount of it to provide enough resistance to hold a typically carbed brew.

Line Type: Resistance:
3/8” OD stainless beverage tubing .2
5/16” OD stainless beverage tubing .5
1/4” OD stainless beverage tubing 2
3/8” ID plastic beer line .11
5/16” ID plastic beer line .17
1/4” ID plastic beer line .7
3/16” ID plastic beer line 2.7


In case it isn't obvious, 3/16" ID beer line has roughly 20 times the resistance of what you're using...

Cheers!

[edit] Start with at least 10 feet/ 3.3 meters of 3/16" ID beer line...

 
Reply With Quote
Old 12-29-2012, 03:05 PM   #6
Math_thomas
Recipes 
 
Dec 2012
Posts: 14
Liked 1 Times on 1 Posts


thanks loads i'll def try this
but is there any think i can do in the mean time or not?
thanks again

 
Reply With Quote
Old 12-29-2012, 03:07 PM   #7
jdub1782
HBT_SUPPORTER.png
Recipes 
 
Jan 2012
Aurora, IL
Posts: 109
Liked 7 Times on 7 Posts


Is there a hardware store nearby? -They normally have a few different hoses in stock - for ice machines, etc. If so you could purchase about 3 meters of 3/16" hose and use it in a pinch -- However I would replace it with proper beer line for long term use unless you find a food grade or drinking water rated hose.

You can try reducing the pressure on the keg down to about 2psi when serving and see if that helps. Just make sure that you crank it back up to 10psi after your party is over or your beer will lose its carbonation.

 
Reply With Quote
Old 12-29-2012, 03:19 PM   #8
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 17,168
Liked 2925 Times on 2184 Posts


Quote:
Originally Posted by jdub1782 View Post
[...]You can try reducing the pressure on the keg down to about 2psi when serving and see if that helps. Just make sure that you crank it back up to 10psi after your party is over or your beer will lose its carbonation.
It's harmless to try, but this may actually aggravate the lack-of-resistance problem by causing the CO2 breakout inside the keg.

'Course, considering the bore of the current tubing, one might not be able to discern the effects of any changes made at the keg side no matter what is tried...

Cheers!

 
Reply With Quote
Old 12-29-2012, 04:51 PM   #9
Math_thomas
Recipes 
 
Dec 2012
Posts: 14
Liked 1 Times on 1 Posts


thank you all i'll try this thank you

 
Reply With Quote
Old 01-04-2013, 09:41 PM   #10
Math_thomas
Recipes 
 
Dec 2012
Posts: 14
Liked 1 Times on 1 Posts


No joy I replaced the line with with a smaller line 3/16 and it is still foamy. I have tried turning regulators down to 2psi just so I could get a pint from it at the party but I still got a glass of foam.
I asked a friend of a friend who owns a pub what it could be and he said I might of had the pressure on the beer for to long. I have tried reading up on this but could not find any info could this be the problem?

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foamy Keg beer i4ourgot Bottling/Kegging 10 01-07-2013 03:37 AM
Foamy Beer skikingjs Beginners Beer Brewing Forum 2 04-06-2012 04:55 PM
Foamy Beer?? szazman73 Bottling/Kegging 1 03-20-2012 05:47 AM
Foamy beer WooHokie Beginners Beer Brewing Forum 7 03-03-2012 04:46 AM
foamy beer woodspointbrewer Bottling/Kegging 3 06-24-2009 05:45 PM


Forum Jump