Size of the aubrins 1/16, 2352 PID? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Electric Brewing > Size of the aubrins 1/16, 2352 PID?

Reply
 
Thread Tools
Old 12-28-2012, 08:23 PM   #1
inhousebrew
Recipes 
 
Aug 2012
minneapolis, minnesota
Posts: 1,463
Liked 127 Times on 114 Posts



Just looking at sourcing out a project box for this and no, I'm not going the easy route and just ordering one from the website. I know the screen on the outside is less than 2"x2" but how deep do they run into the box?


__________________
I hate Walder Frey...

 
Reply With Quote
Old 12-28-2012, 09:16 PM   #2
goybar
Recipes 
 
Apr 2010
Southern Maine
Posts: 252
Liked 6 Times on 6 Posts


I would like to know this as well. Auber Ins. doesn't include this information.

I was thinking about using Console type enclosure like these:

http://www.automationdirect.com/adc/...ator_Consolets

Chris



 
Reply With Quote
Old 12-28-2012, 10:38 PM   #3
jeffmeh
HBT_SUPPORTER.png
 
jeffmeh's Avatar
Recipes 
 
Feb 2009
Posts: 2,136
Liked 208 Times on 178 Posts


Per Kal, you want 45mm x 45mm square holes for the 1/16 DIN devices, like the 2352 PID.

http://www.theelectricbrewery.com/co...-part-1?page=6

 
Reply With Quote
Old 12-28-2012, 11:03 PM   #4
smittygouv30
Recipes 
 
Sep 2011
Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts


The 2352 is 100mm depth or 3.94 inches. This is straight from their downloadable manual.

Corey
__________________
Hop Rehab Electric Brewery

Keg 1: The Electric S'more Stout
Keg 2: Sorachi Ace Clone
Keg 3: Bourbon Barrel Porter
Keg 4: Two-hearted Ale clone

Primary: Empty
Secondary: Lemongrass Wheat Kolsch

 
Reply With Quote
Old 12-28-2012, 11:03 PM   #5
inhousebrew
Recipes 
 
Aug 2012
minneapolis, minnesota
Posts: 1,463
Liked 127 Times on 114 Posts


thanks for that. I must have missed it in the manual
__________________
I hate Walder Frey...

 
Reply With Quote
Old 12-28-2012, 11:45 PM   #6
smittygouv30
Recipes 
 
Sep 2011
Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts


No worries. I've been battling the same question. I want to order the auber enclosure 12x16x6 but am unsure how everything will fit. I think I'm gonna takes chance and try it anyway but certain things will have to be staggered as the PIDs are pretty deep.
__________________
Hop Rehab Electric Brewery

Keg 1: The Electric S'more Stout
Keg 2: Sorachi Ace Clone
Keg 3: Bourbon Barrel Porter
Keg 4: Two-hearted Ale clone

Primary: Empty
Secondary: Lemongrass Wheat Kolsch

 
Reply With Quote
Old 12-29-2012, 01:10 AM   #7
goybar
Recipes 
 
Apr 2010
Southern Maine
Posts: 252
Liked 6 Times on 6 Posts


I missed it too, I have looked though several times.

Thanks,

Chris



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
auber 2352 HellBentBrewCo Electric Brewing 1 09-30-2012 01:23 AM
Auber PID SYL-2352 bbrim Electric Brewing 2 02-19-2012 03:24 AM
Pid syl-2352 problem bloke Electric Brewing 13 01-24-2012 08:17 AM
Help with Auber 2352 bendavanza Electric Brewing 3 08-16-2011 07:38 PM
Help with Auber 2352 PID Navy_Brewer Electric Brewing 0 04-05-2011 07:38 PM


Forum Jump