Rubbermaid Cart for Brew Rig - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Rubbermaid Cart for Brew Rig

Thread Tools
Old 12-28-2012, 12:35 AM   #1
Rickochet's Avatar
Mar 2010
Marion, Indiana
Posts: 107
Liked 3 Times on 3 Posts

I am in the process of building an electric brew rig using Cajun 10 gallon SS pot for the HLT and a 15 gallon Sanke keg for the Boil Kettle. I also have a heavy duty Rubbermaid style 24"x36" cart that I have been thinking about using as the portable rig. The cart I have has a 500 lb. load capacity which is well within my design limits even when both kettles contain liquid.

I am just an occasional all grain brewer so this unit will not get used every weekend. One of the concerns I have is the ability to heat the kettles without affecting the integrity of the plastic. I plan to set the kettles on a 2"x4" pine butcher block style base setting directly on the top shelf of the cart. Has anyone fabricated a similar type of setup? Any suggestions are greatly appreciated.

It is easier to do things right the 1st time rather than to explain why it wasn't when you have to do it the 2nd time.

Reply With Quote
Old 01-01-2013, 06:15 PM   #2
Feb 2009
woodlands texas
Posts: 241
Liked 14 Times on 13 Posts

I would think you would be fine as long as the wood is on there, but you could get this for half the price and have steel.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
brew cart BasementGrowler Brew Stands 2 03-18-2011 11:59 AM
5 Gal Brew Rig (ok, its just a cart...but still) -TH- Brew Stands 7 10-19-2009 07:31 PM
My Brew Cart -TH- Brew Stands 4 11-24-2008 04:41 PM
Brew Cart! RedOctober Equipment/Sanitation 12 10-10-2008 10:25 PM

Forum Jump