This is mine Four taps. 6x perlick 575ss w/creamer, 6x shanks ss 4", 6x tailpiece 1/4" mfl, 6x Rubber washer, 6x Hex nut, Spanner Wrench, 6x dust caps if you want, 6x Black plastic faucet knobs, 6x Ball-lock gas keg coupler-1/4" mfl, Ball-lock Liquid keg Coupler- 1/4" mfl, 18x swivel nut-1/4" ffl to 5/16" barb, 60' beverage line 3/16". Ten feet per tap. May not want or need that much, Co2 5/16" tubing i did 24' for four taps and still had some for my sanke tap that was, 6x 5 gallon ball-lock keys, Drip tray, Co2 tank, high-pressure regulator, secondary Co2 regulator I used the one you see in the picture. i got all my stuff from ritebrew.com, and my regulator form beverage factory. Also temp controller. This is a list of stuff i can make you up a shopping cart to give you a better picture if you need.