Keg my beer - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Keg my beer

Thread Tools
Old 12-26-2012, 03:11 AM   #1
Dec 2012
Posts: 4

How do I regulate my keg with the co2 TAnk I've brewed for a awhile now but I just got a keg set up with a 5 gallon keg and a fridge and tap I just need to know how to put it all together and walk threw help would be appreciated. Thanks a lot wilster brewery

Reply With Quote
Old 12-26-2012, 03:29 AM   #2
SleepyCreekBrews's Avatar
Jul 2012
Leesville, NC
Posts: 485
Liked 60 Times on 51 Posts

I'm gonna assume you have it all connected and managed to get the beer in the keg (and sealed).
After you get to that point, I usually chill the beer for 24 hours and connect the CO2 ...I measure the temp, and set the pressure on the CO2 regulator based on the units of CO2 I want from the Carbonation chart (you can google that)...leave it for 10 days ...good to go .

You can save a lot of the 10 days by setting the pressure to 30 PSI for 24 hours.
Hope that helps

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brewing Beer, Drinking Beer and Managing Beer Gut permo General Beer Discussion 143 06-11-2016 01:11 AM

Forum Jump