Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Cheap compact wort pump
Reply
 
Thread Tools
Old 01-22-2013, 06:13 AM   #21
f0xtr0t
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
f0xtr0t's Avatar
Recipes 
 
Join Date: Aug 2011
Location: South, Texas
Posts: 118
Liked 5 Times on 5 Posts
Likes Given: 4

Default

Ok I see that you would have to prime the lines first. I wonder how hard are the fittings to get. I went ahead and picked one up. I'll try it out and report back.


__________________
Founding Member of B.R.E.W.S. (Border Residents Engineering Wicked Suds)
I'm a beekeeper. Save the bees, Save the world.
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "Wow! What a Ride!” ― Hunter S. Thompson
f0xtr0t is offline
CUrchin Likes This 
Reply With Quote
Old 01-28-2013, 02:14 AM   #22
ColonelPanic
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Pittsburgh, PA
Posts: 24
Liked 6 Times on 4 Posts
Likes Given: 2

Default

I finally got a chance to do a dry run (er, is it a wet run?).

I was thoroughly impressed and I think it's going to do everything I need it to do. Check out my video below.

Note that I just shoved my 1/2 silicone hose over my 1/2 MPT/BSP connections for the purpose of this test. They leaked a little bit and I will be putting quick disconnects on all of these connections before I actually brew with this setup.

http://youtu.be/pb52LeblmEs


ColonelPanic is offline
3
People Like This 
Reply With Quote
Old 01-28-2013, 02:33 AM   #23
ColonelPanic
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Pittsburgh, PA
Posts: 24
Liked 6 Times on 4 Posts
Likes Given: 2

Default

Quote:
Originally Posted by f0xtr0t View Post
I want some intel about this pump too. Would throttling the output/input negatively affect the pump? And are those fittings hard to find? Would you have to gravity feed the lines for it to work?
The pump seems to do fine when throttled back. You can hear it running faster the more you restrict the flow, so we should probably do a long term throttled test to make sure it doesn't eventually burn up.

As far as the fittings, just put 5 or 6 rounds of teflon tape around the fittings and they will fit securely into standard 1/2" NPT connections. I didn't have any leaks even at near boiling temperatures on the 1/2" BSP male (pump) to 1/2" NPT female (ball valve) connection.
ColonelPanic is offline
 
Reply With Quote
Old 01-28-2013, 04:40 AM   #24
Seedly
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Broomfield, CO
Posts: 86
Liked 13 Times on 10 Posts
Likes Given: 6

Default

This certainly has my interest. I want to do a Recirculating E-BIAB setup, but one of the primary things holding me back was shelling out $100+ for a useable pump. This, I think, will do nicely.
Seedly is offline
 
Reply With Quote
Old 01-28-2013, 02:20 PM   #25
revansCAAD8
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
revansCAAD8's Avatar
Recipes 
 
Join Date: Jul 2012
Location: Where We Park It!
Posts: 318
Liked 21 Times on 18 Posts
Likes Given: 163

Default

Quote:
Originally Posted by ColonelPanic View Post
I finally got a chance to do a dry run (er, is it a wet run?).

I was thoroughly impressed and I think it's going to do everything I need it to do. Check out my video below.

Note that I just shoved my 1/2 silicone hose over my 1/2 MPT/BSP connections for the purpose of this test. They leaked a little bit and I will be putting quick disconnects on all of these connections before I actually brew with this setup.

http://youtu.be/pb52LeblmEs
Thank you for the update and video!
revansCAAD8 is offline
 
Reply With Quote
Old 01-28-2013, 02:38 PM   #26
MidTNJasonF
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jan 2013
Location: Smyrna, Tennessee
Posts: 452
Liked 66 Times on 47 Posts
Likes Given: 9

Default

Yes thanks for the update. It seemed to do fine pushing through that plate chiller and back up into the kettle. I wonder how it would do through 50' of HEX coil in a HERMS setup for recirculation? If it can handle that it is indeed an impressive little pump.

How are you planning on powering it for normal usage or are you just going to use the battery?
MidTNJasonF is offline
 
Reply With Quote
Old 01-28-2013, 06:39 PM   #27
ColonelPanic
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Pittsburgh, PA
Posts: 24
Liked 6 Times on 4 Posts
Likes Given: 2

Default

Quote:
Originally Posted by MidTNJasonF
How are you planning on powering it for normal usage or are you just going to use the battery?
I have an SLA battery charger, so I will probably keep using the battery. If it doesn't last long enough to go through a brew day, then I will dig through my stash of old power adapters and find one that outputs 12v DC at 0.8A (or more).
ColonelPanic is offline
 
Reply With Quote
Old 01-28-2013, 07:41 PM   #28
MidTNJasonF
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jan 2013
Location: Smyrna, Tennessee
Posts: 452
Liked 66 Times on 47 Posts
Likes Given: 9

Default

Just thinking about this, random thoughts rolling around in my head. I could see this
http://www.amazon.com/Distributed-Po...wer+supply+12v

with switches wired in for multiple pumps in a system or if you were going automated SSRs wired in and triggered from your controller.

5 channels at 5amp total for ~$35 any one channel at 1.65amp.

Makes it interesting with a 3 pump 3 vessel eHERMS system with the pumps right on the outputs of the kettles.
MidTNJasonF is offline
 
Reply With Quote
Old 01-30-2013, 11:00 AM   #29
ColonelPanic
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Pittsburgh, PA
Posts: 24
Liked 6 Times on 4 Posts
Likes Given: 2

Default

Quote:
Originally Posted by MidTNJasonF
Just thinking about this, random thoughts rolling around in my head. I could see this
http://www.amazon.com/Distributed-Po...wer+supply+12v

with switches wired in for multiple pumps in a system or if you were going automated SSRs wired in and triggered from your controller.

5 channels at 5amp total for ~$35 any one channel at 1.65amp.

Makes it interesting with a 3 pump 3 vessel eHERMS system with the pumps right on the outputs of the kettles.
That definitely has potential. I've been considering building a temperature controlled gas burner with a 12V valve and pilot light to go along with my 12V pump. That box would be a good fit for that as well.
ColonelPanic is offline
 
Reply With Quote
Old 01-30-2013, 01:14 PM   #30
alien
Feedback Score: 1 reviews
Recipes 
 
Join Date: Apr 2012
Location: Philadelphia, PA
Posts: 1,235
Liked 65 Times on 58 Posts
Likes Given: 61

Default

These pumps, or ones that look very similar, are available from http://solarproject.co.uk/ and are in fairly general use by UK homebrewers where they are known as "solar pumps". I have the SP20/20 version myself which may be slightly more powerful than the ebay model (it is rated at 14 W). I have yet to put it into use. The output threads are male 1/2" BSP but 1/2" NPT fittings work perfectly well.

Here's another video:


alien is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
A cheap wort cooling pump ! floridabrewer All Grain & Partial Mash Brewing 9 02-23-2013 11:31 AM
Immersion Wort Chiller: compact vs expanded golphur Equipment/Sanitation 2 08-28-2011 11:51 PM
Compact, easy, cheap option for cooling keg (at all times w/out ice)??? duganderson Kegerators and Keezers 1 02-12-2011 08:10 PM
Notice on: "A Cheap Wort Cooling Pump" floridabrewer All Grain & Partial Mash Brewing 1 10-14-2005 04:37 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS